[Uboot-stm32] Issues with Loading Linux OS on our custom made STM32 SOM board

[Patrice CHOTARD]

Hi

When did you submit your request on ST forum ?
Can you send the link of your forum request ?
I can't find it.

Thanks

On 10/14/22 14:42, Pralay Panchwate wrote:
> Hi Patrice,
> I have already submitted this post with the same title on the forum but, No
> reply from anyone whatsoever.
> Any support form you guys will be highly appreciated.
> 
> Regards,
> Pralay Panchwate
> Embedded Engineer
> Melody innovations pvt ltd.
> Contact: +91-9850211623
> 
> The information transmitted by this email is intended only for the person
> or entity to which it is addressed. This email may contain proprietary,
> business-confidential, and/or privileged material. If you are not the
> intended recipient of this message, be aware that any use, review,
> re-transmission, distribution, reproduction or any action taken in reliance
> upon this message is strictly prohibited. If you received this in error,
> please contact the sender and delete the material from all computers.
> 
> 
> On Fri, 14 Oct 2022 at 14:19, Patrice CHOTARD <patrice.chotard at foss.st.com>
> wrote:
> 
>> Hi Pralay
>>
>> Submit either your request on online support :
>> https://community.st.com/s/onlinesupport
>> or
>> Post a message on STM32MPUs forum:
>> https://community.st.com/s/topic/0TO0X0000003u2AWAQ/stm32-mpus
>>
>> Thanks
>> Patrice
>>
>> On 10/13/22 11:04, Pralay Panchwate wrote:
>>> Hello Everyone,
>>> We are in the development phase of our own custom made SOM board using
>>> STM32MP157A chip.
>>> Can we use STM32MP157A-EV1 image for flashing our custom STM32MP1 based
>>> board ?
>>>
>>> We tried burning our STM32MP1 board with existing "
>>> *FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv*" file but it throws
>>> following error -
>>>
>>>  Error: TSV files are only supported for STM32MP
>>>
>>> We're using an onboard eMMC (From Kioxia) and STM32MP157AAD3 chip from
>> ST.
>>> I have attached snapshot of log. and I'm extremely in need of support
>>> Below is the LOG:
>>>
>>>
>>>    1. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
>>>    openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
>>>    STM32_Programmer_CLI -c port=usb1 -w
>> flashlayout_st-image-weston/trusted/
>>>    FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
>>>    2. -------------------------------------------------------------------
>>>    3. STM32CubeProgrammer v2.11.0
>>>    4. -------------------------------------------------------------------
>>>    5.
>>>    6.
>>>    7.
>>>    8. USB speed : High Speed (480MBit/s)
>>>    9. Manuf. ID : STMicroelectronics
>>>    10. Product ID : DFU in HS Mode @Device ID /0x500, @Revision ID
>> /0x0000
>>>    11. SN : 0019002C3431511733353431
>>>    12. DFU protocol: 1.1
>>>    13. Board : --
>>>    14. Device ID : 0x0500
>>>    15. Device name : STM32MP1
>>>    16. Device type : MPU
>>>    17. Revision ID : --
>>>    18. Device CPU : Cortex-A7
>>>    19.
>>>    20. Start Embedded Flashing service
>>>    21.
>>>    22.
>>>    23.
>>>    24. Memory Programming ...
>>>    25. Opening and parsing file: tf-a-stm32mp157a-ev1-usb.stm32
>>>    26. File : tf-a-stm32mp157a-ev1-usb.stm32
>>>    27. Size : 220.82 KB
>>>    28. Partition ID : 0x01
>>>    29.
>>>    30. Download in Progress:
>>>    31. [==================================================] 100%
>>>    32.
>>>    33. File download complete
>>>    34. Time elapsed during download operation: 00:00:01.150
>>>    35.
>>>    36. RUNNING Program ...
>>>    37. PartID: :0x01
>>>    38.
>>>    39.
>>>    40. Error: Start operation failed at partition 0x01
>>>    41. Error: TSV flashing service failed
>>>    42. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
>>>    openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
>>>    STM32_Programmer_CLI -c port=usb1 -w
>> flashlayout_st-image-weston/trusted/
>>>    FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
>>>    43.
>> -------------------------------------------------------------------
>>>    44. STM32CubeProgrammer v2.11.0
>>>    45.
>> -------------------------------------------------------------------
>>>    46.
>>>    47.
>>>    48.
>>>    49. USB speed : High Speed (480MBit/s)
>>>    50. Manuf. ID :
>>>    51. Product ID :
>>>    52. SN :
>>>    53. DFU protocol: 1.1
>>>    54. Board : --
>>>    55. IAP
>>>    56. Error: TSV files are only supported for STM32MP
>>>
>>>
>>> Please help us and revert on this problem ASAP.
>>>
>>> Regards,
>>> Pralay Panchwate
>>> Embedded Engineer
>>> Melody innovations pvt ltd.
>>> Contact: +91-9850211623
>>>
>>> The information transmitted by this email is intended only for the person
>>> or entity to which it is addressed. This email may contain proprietary,
>>> business-confidential, and/or privileged material. If you are not the
>>> intended recipient of this message, be aware that any use, review,
>>> re-transmission, distribution, reproduction or any action taken in
>> reliance
>>> upon this message is strictly prohibited. If you received this in error,
>>> please contact the sender and delete the material from all computers.
>>>
>>>
>>> _______________________________________________
>>> Uboot-stm32 mailing list
>>> Uboot-stm32 at st-md-mailman.stormreply.com
>>> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>> _______________________________________________
>> Uboot-stm32 mailing list
>> Uboot-stm32 at st-md-mailman.stormreply.com
>> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>>
>