[Uboot-stm32] Issues with Loading Linux OS on our custom made STM32 SOM board
Patrick DELAUNAY
patrick.delaunay at foss.st.com
Fri Oct 14 13:11:36 UTC 2022
+ Bernard
On 10/14/22 14:51, Patrice CHOTARD wrote:
> Hi
>
> When did you submit your request on ST forum ?
> Can you send the link of your forum request ?
> I can't find it.
>
> Thanks
>
> On 10/14/22 14:42, Pralay Panchwate wrote:
>> Hi Patrice,
>> I have already submitted this post with the same title on the forum but, No
>> reply from anyone whatsoever.
>> Any support form you guys will be highly appreciated.
>>
>> Regards,
>> Pralay Panchwate
>> Embedded Engineer
>> Melody innovations pvt ltd.
>> Contact: +91-9850211623
>>
>> The information transmitted by this email is intended only for the person
>> or entity to which it is addressed. This email may contain proprietary,
>> business-confidential, and/or privileged material. If you are not the
>> intended recipient of this message, be aware that any use, review,
>> re-transmission, distribution, reproduction or any action taken in reliance
>> upon this message is strictly prohibited. If you received this in error,
>> please contact the sender and delete the material from all computers.
>>
>>
>> On Fri, 14 Oct 2022 at 14:19, Patrice CHOTARD <patrice.chotard at foss.st.com>
>> wrote:
>>
>>> Hi Pralay
>>>
>>> Submit either your request on online support :
>>> https://community.st.com/s/onlinesupport
>>> or
>>> Post a message on STM32MPUs forum:
>>> https://community.st.com/s/topic/0TO0X0000003u2AWAQ/stm32-mpus
>>>
>>> Thanks
>>> Patrice
>>>
>>> On 10/13/22 11:04, Pralay Panchwate wrote:
>>>> Hello Everyone,
>>>> We are in the development phase of our own custom made SOM board using
>>>> STM32MP157A chip.
>>>> Can we use STM32MP157A-EV1 image for flashing our custom STM32MP1 based
>>>> board ?
>>>>
>>>> We tried burning our STM32MP1 board with existing "
>>>> *FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv*" file but it throws
>>>> following error -
>>>>
>>>> Error: TSV files are only supported for STM32MP
>>>>
>>>> We're using an onboard eMMC (From Kioxia) and STM32MP157AAD3 chip from
>>> ST.
>>>> I have attached snapshot of log. and I'm extremely in need of support
>>>> Below is the LOG:
>>>>
>>>>
>>>> 1. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
>>>> openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
>>>> STM32_Programmer_CLI -c port=usb1 -w
>>> flashlayout_st-image-weston/trusted/
>>>> FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
>>>> 2. -------------------------------------------------------------------
>>>> 3. STM32CubeProgrammer v2.11.0
>>>> 4. -------------------------------------------------------------------
>>>> 5.
>>>> 6.
>>>> 7.
>>>> 8. USB speed : High Speed (480MBit/s)
>>>> 9. Manuf. ID : STMicroelectronics
>>>> 10. Product ID : DFU in HS Mode @Device ID /0x500, @Revision ID
>>> /0x0000
>>>> 11. SN : 0019002C3431511733353431
>>>> 12. DFU protocol: 1.1
>>>> 13. Board : --
>>>> 14. Device ID : 0x0500
>>>> 15. Device name : STM32MP1
>>>> 16. Device type : MPU
>>>> 17. Revision ID : --
>>>> 18. Device CPU : Cortex-A7
>>>> 19.
>>>> 20. Start Embedded Flashing service
>>>> 21.
>>>> 22.
>>>> 23.
>>>> 24. Memory Programming ...
>>>> 25. Opening and parsing file: tf-a-stm32mp157a-ev1-usb.stm32
>>>> 26. File : tf-a-stm32mp157a-ev1-usb.stm32
>>>> 27. Size : 220.82 KB
>>>> 28. Partition ID : 0x01
>>>> 29.
>>>> 30. Download in Progress:
>>>> 31. [==================================================] 100%
>>>> 32.
>>>> 33. File download complete
>>>> 34. Time elapsed during download operation: 00:00:01.150
>>>> 35.
>>>> 36. RUNNING Program ...
>>>> 37. PartID: :0x01
>>>> 38.
>>>> 39.
>>>> 40. Error: Start operation failed at partition 0x01
>>>> 41. Error: TSV flashing service failed
>>>> 42. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
>>>> openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
>>>> STM32_Programmer_CLI -c port=usb1 -w
>>> flashlayout_st-image-weston/trusted/
>>>> FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
>>>> 43.
>>> -------------------------------------------------------------------
>>>> 44. STM32CubeProgrammer v2.11.0
>>>> 45.
>>> -------------------------------------------------------------------
>>>> 46.
>>>> 47.
>>>> 48.
>>>> 49. USB speed : High Speed (480MBit/s)
>>>> 50. Manuf. ID :
>>>> 51. Product ID :
>>>> 52. SN :
>>>> 53. DFU protocol: 1.1
>>>> 54. Board : --
>>>> 55. IAP
>>>> 56. Error: TSV files are only supported for STM32MP
>>>>
>>>>
>>>> Please help us and revert on this problem ASAP.
>>>>
>>>> Regards,
>>>> Pralay Panchwate
>>>> Embedded Engineer
>>>> Melody innovations pvt ltd.
>>>> Contact: +91-9850211623
>>>>
>>>> The information transmitted by this email is intended only for the person
>>>> or entity to which it is addressed. This email may contain proprietary,
>>>> business-confidential, and/or privileged material. If you are not the
>>>> intended recipient of this message, be aware that any use, review,
>>>> re-transmission, distribution, reproduction or any action taken in
>>> reliance
>>>> upon this message is strictly prohibited. If you received this in error,
>>>> please contact the sender and delete the material from all computers.
>>>>
>>>>
>>>> _______________________________________________
>>>> Uboot-stm32 mailing list
>>>> Uboot-stm32 at st-md-mailman.stormreply.com
>>>> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>>> _______________________________________________
>>> Uboot-stm32 mailing list
>>> Uboot-stm32 at st-md-mailman.stormreply.com
>>> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>>>
> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
More information about the Uboot-stm32
mailing list