[Uboot-stm32] Issues with Loading Linux OS on our custom made STM32 SOM board

[Pralay Panchwate]

Hi Patrice,
I have already submitted this post with the same title on the forum but, No
reply from anyone whatsoever.
Any support form you guys will be highly appreciated.

Regards,
Pralay Panchwate
Embedded Engineer
Melody innovations pvt ltd.
Contact: +91-9850211623

The information transmitted by this email is intended only for the person
or entity to which it is addressed. This email may contain proprietary,
business-confidential, and/or privileged material. If you are not the
intended recipient of this message, be aware that any use, review,
re-transmission, distribution, reproduction or any action taken in reliance
upon this message is strictly prohibited. If you received this in error,
please contact the sender and delete the material from all computers.


On Fri, 14 Oct 2022 at 14:19, Patrice CHOTARD <patrice.chotard at foss.st.com>
wrote:

> Hi Pralay
>
> Submit either your request on online support :
> https://community.st.com/s/onlinesupport
> or
> Post a message on STM32MPUs forum:
> https://community.st.com/s/topic/0TO0X0000003u2AWAQ/stm32-mpus
>
> Thanks
> Patrice
>
> On 10/13/22 11:04, Pralay Panchwate wrote:
> > Hello Everyone,
> > We are in the development phase of our own custom made SOM board using
> > STM32MP157A chip.
> > Can we use STM32MP157A-EV1 image for flashing our custom STM32MP1 based
> > board ?
> >
> > We tried burning our STM32MP1 board with existing "
> > *FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv*" file but it throws
> > following error -
> >
> >  Error: TSV files are only supported for STM32MP
> >
> > We're using an onboard eMMC (From Kioxia) and STM32MP157AAD3 chip from
> ST.
> > I have attached snapshot of log. and I'm extremely in need of support
> > Below is the LOG:
> >
> >
> >    1. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
> >    openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
> >    STM32_Programmer_CLI -c port=usb1 -w
> flashlayout_st-image-weston/trusted/
> >    FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
> >    2. -------------------------------------------------------------------
> >    3. STM32CubeProgrammer v2.11.0
> >    4. -------------------------------------------------------------------
> >    5.
> >    6.
> >    7.
> >    8. USB speed : High Speed (480MBit/s)
> >    9. Manuf. ID : STMicroelectronics
> >    10. Product ID : DFU in HS Mode @Device ID /0x500, @Revision ID
> /0x0000
> >    11. SN : 0019002C3431511733353431
> >    12. DFU protocol: 1.1
> >    13. Board : --
> >    14. Device ID : 0x0500
> >    15. Device name : STM32MP1
> >    16. Device type : MPU
> >    17. Revision ID : --
> >    18. Device CPU : Cortex-A7
> >    19.
> >    20. Start Embedded Flashing service
> >    21.
> >    22.
> >    23.
> >    24. Memory Programming ...
> >    25. Opening and parsing file: tf-a-stm32mp157a-ev1-usb.stm32
> >    26. File : tf-a-stm32mp157a-ev1-usb.stm32
> >    27. Size : 220.82 KB
> >    28. Partition ID : 0x01
> >    29.
> >    30. Download in Progress:
> >    31. [==================================================] 100%
> >    32.
> >    33. File download complete
> >    34. Time elapsed during download operation: 00:00:01.150
> >    35.
> >    36. RUNNING Program ...
> >    37. PartID: :0x01
> >    38.
> >    39.
> >    40. Error: Start operation failed at partition 0x01
> >    41. Error: TSV flashing service failed
> >    42. user at user:~/STM32MPU-Ecosystem-v4.0.0/Starter-Package/stm32mp1-
> >    openstlinux-5.15-yocto-kirkstone-mp1-v22.06.15/images/stm32mp1$
> >    STM32_Programmer_CLI -c port=usb1 -w
> flashlayout_st-image-weston/trusted/
> >    FlashLayout_emmc_stm32mp157a-ev1-trusted.tsv
> >    43.
> -------------------------------------------------------------------
> >    44. STM32CubeProgrammer v2.11.0
> >    45.
> -------------------------------------------------------------------
> >    46.
> >    47.
> >    48.
> >    49. USB speed : High Speed (480MBit/s)
> >    50. Manuf. ID :
> >    51. Product ID :
> >    52. SN :
> >    53. DFU protocol: 1.1
> >    54. Board : --
> >    55. IAP
> >    56. Error: TSV files are only supported for STM32MP
> >
> >
> > Please help us and revert on this problem ASAP.
> >
> > Regards,
> > Pralay Panchwate
> > Embedded Engineer
> > Melody innovations pvt ltd.
> > Contact: +91-9850211623
> >
> > The information transmitted by this email is intended only for the person
> > or entity to which it is addressed. This email may contain proprietary,
> > business-confidential, and/or privileged material. If you are not the
> > intended recipient of this message, be aware that any use, review,
> > re-transmission, distribution, reproduction or any action taken in
> reliance
> > upon this message is strictly prohibited. If you received this in error,
> > please contact the sender and delete the material from all computers.
> >
> >
> > _______________________________________________
> > Uboot-stm32 mailing list
> > Uboot-stm32 at st-md-mailman.stormreply.com
> > https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
> _______________________________________________
> Uboot-stm32 mailing list
> Uboot-stm32 at st-md-mailman.stormreply.com
> https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://st-md-mailman.stormreply.com/pipermail/uboot-stm32/attachments/20221014/3329f0ff/attachment.html>