[Linux-stm32] [PATCH net-next 12/12] arm64: dts: qcom: qcs6490-rb3gen2: enable TC9564 with a single QCS8081 phy

[Daniel Thompson]

On Fri, May 01, 2026 at 11:09:42PM +0200, Andrew Lunn wrote:
> > +					tc956x_emac1_phy: ethernet-phy at 1c {
> > +						compatible = "ethernet-phy-id004d.d101";
> > +						reg = <0x1c>;
> > +						reset-gpios = <&tc956x_emac0 1 GPIO_ACTIVE_LOW>;
> > +						reset-assert-us = <20>;
> > +						reset-deassert-us = <20>;
> > +
> > +						pinctrl-names = "default";
> > +						pinctrl-0 = <&qep_irq_pin>;
> > +						interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>;
>
> What is probably wrong. PHY interrupts are level, not edge.

Thanks (and agree). Will fix.


Daniel.