[Linux-stm32] [PATCH net-next 12/12] arm64: dts: qcom: qcs6490-rb3gen2: enable TC9564 with a single QCS8081 phy

[Andrew Lunn]

> +					tc956x_emac1_phy: ethernet-phy at 1c {
> +						compatible = "ethernet-phy-id004d.d101";
> +						reg = <0x1c>;
> +						reset-gpios = <&tc956x_emac0 1 GPIO_ACTIVE_LOW>;
> +						reset-assert-us = <20>;
> +						reset-deassert-us = <20>;
> +
> +						pinctrl-names = "default";
> +						pinctrl-0 = <&qep_irq_pin>;
> +						interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>;

What is probably wrong. PHY interrupts are level, not edge.

     Andrew