[Linux-stm32] [PATCH 10/12] ARM: dts: stm32: Add bindings for SPI2 on AV96

[Marek Vasut]

On 5/7/20 2:53 PM, Alexandre Torgue wrote:
> Hi Marek
> 
> On 4/29/20 6:37 PM, Marek Vasut wrote:
>> Add SPI2 bindings to AV96 DT, the SPI2 IOs are present on
>> low-speed expansion connector X6. This is disabled by default
>> and can be enabled if something is connected there.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> Cc: Alexandre Torgue <alexandre.torgue at st.com>
>> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> Cc: Patrice Chotard <patrice.chotard at st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>> Cc: linux-stm32 at st-md-mailman.stormreply.com
>> To: linux-arm-kernel at lists.infradead.org
>> ---
>>   arch/arm/boot/dts/stm32mp157a-avenger96.dts | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
>> b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
>> index 72ca282898eb..a9f3ba9da170 100644
>> --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
>> +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
>> @@ -551,6 +551,15 @@ brcmf: bcrmf at 1 {
>>       };
>>   };
>>   +&spi2 {
>> +    pinctrl-names = "default";
>> +    pinctrl-0 = <&spi2_pins_a>;
>> +    cs-gpios = <&gpioi 0 0>;
>> +    status = "disabled";
>> +    /delete-property/dmas;
>> +    /delete-property/dma-names;
>> +};
>> +
>>   &uart4 {
>>       /* On Low speed expansion header */
>>       label = "LS-UART1";
>>
> 
> Sorry I (again) lost the cover-letter (I need to better configure my
> mailer) so I repond on this patch only.
> 
> As discussed, patch 1 to 10 have been applied on stm32-next.
> Patches 11/12 have been dropped waiting for on update.

Thank you!