[Linux-stm32] [PATCH 10/12] ARM: dts: stm32: Add bindings for SPI2 on AV96

[Alexandre Torgue]

Hi Marek

On 4/29/20 6:37 PM, Marek Vasut wrote:
> Add SPI2 bindings to AV96 DT, the SPI2 IOs are present on
> low-speed expansion connector X6. This is disabled by default
> and can be enabled if something is connected there.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp157a-avenger96.dts | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> index 72ca282898eb..a9f3ba9da170 100644
> --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> @@ -551,6 +551,15 @@ brcmf: bcrmf at 1 {
>   	};
>   };
>   
> +&spi2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2_pins_a>;
> +	cs-gpios = <&gpioi 0 0>;
> +	status = "disabled";
> +	/delete-property/dmas;
> +	/delete-property/dma-names;
> +};
> +
>   &uart4 {
>   	/* On Low speed expansion header */
>   	label = "LS-UART1";
> 

Sorry I (again) lost the cover-letter (I need to better configure my 
mailer) so I repond on this patch only.

As discussed, patch 1 to 10 have been applied on stm32-next.
Patches 11/12 have been dropped waiting for on update.

regards
Alex