[Linux-stm32] [PATCH V2 02/22] ARM: dts: stm32: Repair ethernet operation on AV96

[Manivannan Sadhasivam]

On Tue, Mar 31, 2020 at 02:56:41AM +0200, Marek Vasut wrote:
> The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2
> and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
> V2: No change
> ---
>  arch/arm/boot/dts/stm32mp157a-avenger96.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> index 425175f7d83c..1d15b745feeb 100644
> --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> @@ -81,8 +81,8 @@ led6 {
>  
>  &ethernet0 {
>  	status = "okay";
> -	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> -	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
> +	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
> +	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_b>;
>  	pinctrl-names = "default", "sleep";
>  	phy-mode = "rgmii";
>  	max-speed = <1000>;
> -- 
> 2.25.1
>