[Linux-stm32] [PATCH V2 03/22] ARM: dts: stm32: Add missing ethernet PHY reset on AV96

[Marek Vasut]

Add PHY reset GPIO on AV96 ethernet PHY.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Alexandre Torgue <alexandre.torgue at st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: linux-stm32 at st-md-mailman.stormreply.com
To: linux-arm-kernel at lists.infradead.org
---
V2: No change
---
 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 1d15b745feeb..a568d3824cb0 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -87,6 +87,8 @@ &ethernet0 {
 	phy-mode = "rgmii";
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
+	phy-reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
 
 	mdio0 {
 		#address-cells = <1>;
-- 
2.25.1