[Linux-stm32] [PATCH 0/4] Add nvmem support on STM32

[Srinivas Kandagatla]

On 13/02/2019 10:15, Fabrice Gasnier wrote:
> On 1/30/19 5:38 PM, Fabrice Gasnier wrote:
>> Non volatile memory area is available on STM32. It contains various
>> factory programmed information such as unique device ID, analog calibration...
>> This patchset adds NVMEM support to access these data.
> 
> Hello,
> 
> Gentle reminder for this new driver review
Nvmem provider driver itself looks fine for me, but I am unable to take 
this as 5.1 material, as I normally take nvmem patches which are 
reviewed and ready before rc5.

dt bindings patch needs an ack from DT maintainers.

Thanks,
srini
> 
> Best Regards,
> Fabrice
> 
>>
>> Fabrice Gasnier (4):
>>    dt-bindings: nvmem: Add STM32 factory-programmed romem
>>    nvmem: Add driver for STM32 factory-programmed read only mem
>>    nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
>>    ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
>>
>>   .../devicetree/bindings/nvmem/st,stm32-romem.txt   |  31 ++++
>>   arch/arm/boot/dts/stm32mp157c.dtsi                 |  13 ++
>>   drivers/nvmem/Kconfig                              |  10 +
>>   drivers/nvmem/Makefile                             |   2 +
>>   drivers/nvmem/stm32-romem.c                        | 202 +++++++++++++++++++++
>>   5 files changed, 258 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
>>   create mode 100644 drivers/nvmem/stm32-romem.c
>>