September 2022 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Sep 5 09:15:28 UTC 2022
Ending: Fri Sep 30 07:36:38 UTC 2022
Messages: 198

• [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: remove hwlocks from pinctrl   Etienne Carriere
  • [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: remove hwlocks from pinctrl   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: remove hwlocks from pinctrl   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] configs: stm32mp*: reset via CONFIG_RESET_SCMI   Oleksandr Suvorov
  • [Uboot-stm32] [PATCH] configs: stm32mp*: reset via CONFIG_RESET_SCMI   Jorge Ramirez-Ortiz, Foundries
  • [Uboot-stm32] [PATCH] configs: stm32mp*: reset via CONFIG_RESET_SCMI   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] configs: stm32mp*: fix system reset   Oleksandr Suvorov
  • [Uboot-stm32] [PATCH] configs: stm32mp*: fix system reset   Jorge Ramirez-Ortiz
  • [Uboot-stm32] [PATCH] configs: stm32mp*: fix system reset   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH] configs: stm32mp*: fix system reset   Jorge Ramirez-Ortiz, Foundries
      • [Uboot-stm32] [PATCH] configs: stm32mp*: fix system reset   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v1 0/4] phy: Add generic_{setup, shutdown}_phy() helpers   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 0/4] phy: Add generic_{setup, shutdown}_phy() helpers   Marek Vasut
• [Uboot-stm32] [PATCH v1 1/4] phy: Add generic_{setup, shutdown}_phy() helpers   Patrice Chotard
• [Uboot-stm32] [PATCH v1 2/4] usb: ohci: Make usage of generic_{setup, shutdown}_phy() helpers   Patrice Chotard
• [Uboot-stm32] [PATCH v1 3/4] usb: ehci: Make usage of generic_{setup, shutdown}_phy() helpers   Patrice Chotard
• [Uboot-stm32] [PATCH v1 4/4] usb: ehci: Remove unused ehci_{setup, shutdown}_phy() helpers   Patrice Chotard
• [Uboot-stm32] [PATCH v2] clk: update clk_clean_rate_cache to use private clk struct   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2] clk: update clk_clean_rate_cache to use private clk struct   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/4] stm32mp: stm32prog: support empty flashlayout   Patrick Delaunay
  • [Uboot-stm32] [PATCH 3/4] stm32mp: stm32prog: solve warning for 64bits compilation   Patrick Delaunay
    • [Uboot-stm32] [PATCH 3/4] stm32mp: stm32prog: solve warning for 64bits compilation   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 4/4] stm32mp: stm32prog: correctly handle OTP when SMC is not supported   Patrick Delaunay
    • [Uboot-stm32] [PATCH 4/4] stm32mp: stm32prog: correctly handle OTP when SMC is not supported   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 1/4] stm32mp: stm32prog: support empty flashlayout   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 1/4] stm32mp: stm32prog: support empty flashlayout   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/4] stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDR   Patrick Delaunay
  • [Uboot-stm32] [PATCH 2/4] stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDR   Patrice CHOTARD
• [Uboot-stm32] [PATCHv2 2/2] i2c: stm32f7: do not set the STOP condition on error   Alain Volmat
  • [Uboot-stm32] [PATCHv2 2/2] i2c: stm32f7: do not set the STOP condition on error   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp: alignment with v6.0-rc3   Patrick Delaunay
  • [Uboot-stm32] [PATCH] ARM: dts: stm32mp: alignment with v6.0-rc3   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH] ARM: dts: stm32mp: alignment with v6.0-rc3   Patrice CHOTARD
      • [Uboot-stm32] [PATCH] ARM: dts: stm32mp: alignment with v6.0-rc3   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp: simplify the STM32MP15x package parsing code   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] board: stm32mp1: remove test on CONFIG_DM_REGULATOR   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/3] phy: stm32-usbphyc: add counter of PLL consumer   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/3] phy: stm32-usbphyc: usbphyc is a clock provider of ck_usbo_48m clock   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 3/3] clk: stm32mp: handle ck_usbo_48m clock provided by USBPHYC   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] ARM: dts: stm32: Fix display-timings settings for stm32f746-disco   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] configs: stm32: Enable CONFIG_DM_REGULATOR for stm32f769-disco   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2] configs: stih410-b2260: Fix SYS_HZ_CLOCK value   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] confis: stm32mp15: activate DM_REGULATOR_SCMI   Patrick Delaunay
  • [Uboot-stm32] [PATCH] confis: stm32mp15: activate DM_REGULATOR_SCMI   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] confis: stm32mp15: activate DM_REGULATOR_SCMI   Patrick DELAUNAY
• [Uboot-stm32] [PULL] Pull request for u-boot master / v2022.10 = u-boot-stm32-20220907   Patrick DELAUNAY
  • [Uboot-stm32] [PULL] Pull request for u-boot master / v2022.10 = u-boot-stm32-20220907   Tom Rini
• [Uboot-stm32] [PATCH 0/3] i2c: stm32: cleanup & stop handling fix   Alain Volmat
  • [Uboot-stm32] [PATCH 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Alain Volmat
    • [Uboot-stm32] [PATCH 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Alain Volmat
    • [Uboot-stm32] [PATCH 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH 3/3] i2c: stm32: only send a STOP upon transfer completion   Alain Volmat
• [Uboot-stm32] [PATCH 3/3] i2c: stm32: only send a STOP upon transfer completion   Jorge Ramirez-Ortiz, Foundries
  • [Uboot-stm32] [PATCH 3/3] i2c: stm32: only send a STOP upon transfer completion   Alain Volmat
• [Uboot-stm32] [PATCH v2 0/3] i2c: stm32: cleanup & stop handling fix   Alain Volmat
  • [Uboot-stm32] [PATCH v2 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Alain Volmat
    • [Uboot-stm32] [PATCH v2 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Alain Volmat
  • [Uboot-stm32] [PATCH v2 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Alain Volmat
  • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Jorge Ramirez-Ortiz, Foundries
      • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Heiko Schocher
      • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Alain Volmat
      • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Jorge Ramirez-Ortiz, Foundries
      • [Uboot-stm32] [PATCH v2 3/3] i2c: stm32: only send a STOP upon transfer completion   Alain Volmat
• [Uboot-stm32] [PATCH 2/2] usb: hub: increase HUB_DEBOUNCE_TIMEOUT   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH 2/2] usb: hub: increase HUB_DEBOUNCE_TIMEOUT   Marek Vasut
• [Uboot-stm32] [PATCH v2 1/2] usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 1/2] usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT   Marek Vasut
    • [Uboot-stm32] [PATCH v2 1/2] usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 1/2] usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT   Marek Vasut
  • [Uboot-stm32] [PATCH v2 1/2] usb: hub: allow to increase HUB_DEBOUNCE_TIMEOUT   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 2/2] configs: stm32mp15: set CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2s   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 2/2] configs: stm32mp15: set CONFIG_USB_HUB_DEBOUNCE_TIMEOUT=2s   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp: stm32prog: improve the partitioning trace   Patrick Delaunay
  • [Uboot-stm32] [PATCH] stm32mp: stm32prog: improve the partitioning trace   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] stm32mp: stm32prog: improve the partitioning trace   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 0/3] i2c: stm32: cleanup & stop handling fix   Alain Volmat
  • [Uboot-stm32] [PATCH v3 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Alain Volmat
    • [Uboot-stm32] [PATCH v3 1/3] i2c: stm32: fix comment and remove unused AUTOEND bit   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v3 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Alain Volmat
    • [Uboot-stm32] [PATCH v3 2/3] i2c: stm32: remove unused stop parameter in start & reload handling   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v3 3/3] i2c: stm32: do not set the STOP condition on error   Alain Volmat
    • [Uboot-stm32] [PATCH v3 3/3] i2c: stm32: do not set the STOP condition on error   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v3 3/3] i2c: stm32: do not set the STOP condition on error   Jorge Ramirez-Ortiz, Foundries
      • [Uboot-stm32] [PATCH v3 3/3] i2c: stm32: do not set the STOP condition on error   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v3 3/3] i2c: stm32: do not set the STOP condition on error   Patrice CHOTARD
• [Uboot-stm32] [PATCH v4 0/4] i2c: stm32: cleanup & stop handling fix   Alain Volmat
  • [Uboot-stm32] [PATCH v4 1/4] i2c: stm32: fix comment and remove unused AUTOEND bit   Alain Volmat
    • [Uboot-stm32] [PATCH v4 1/4] i2c: stm32: fix comment and remove unused AUTOEND bit   Heiko Schocher
    • [Uboot-stm32] [PATCH v4 1/4] i2c: stm32: fix comment and remove unused AUTOEND bit   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v4 1/4] i2c: stm32: fix comment and remove unused AUTOEND bit   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH v4 2/4] i2c: stm32: remove unused stop parameter in start & reload handling   Alain Volmat
    • [Uboot-stm32] [PATCH v4 2/4] i2c: stm32: remove unused stop parameter in start & reload handling   Heiko Schocher
    • [Uboot-stm32] [PATCH v4 2/4] i2c: stm32: remove unused stop parameter in start & reload handling   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v4 2/4] i2c: stm32: remove unused stop parameter in start & reload handling   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Alain Volmat
    • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Heiko Schocher
    • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v4 3/4] i2c: stm32: do not set the STOP condition on error   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH v4 4/4] i2c: stm32: fix usage of rise/fall device tree properties   Alain Volmat
    • [Uboot-stm32] [PATCH v4 4/4] i2c: stm32: fix usage of rise/fall device tree properties   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v4 4/4] i2c: stm32: fix usage of rise/fall device tree properties   Heiko Schocher
    • [Uboot-stm32] [PATCH v4 4/4] i2c: stm32: fix usage of rise/fall device tree properties   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH v4 4/4] i2c: stm32: fix usage of rise/fall device tree properties   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] board: st: stm32mp1: use of correct compatible string to add partitions   Patrick Delaunay
  • [Uboot-stm32] [PATCH] board: st: stm32mp1: use of correct compatible string to add partitions   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] board: st: stm32mp1: use of correct compatible string to add partitions   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/3] mmc: stm32_sdmmc2: add dual data rate support   Yann Gautier
  • [Uboot-stm32] [PATCH 3/3] mmc: stm32_sdmmc2: manage vqmmc   Yann Gautier
• [Uboot-stm32] [PATCH 2/3] mmc: stm32_sdmmc2: protect against unsupported modes   Yann Gautier
• [Uboot-stm32] [PATCH v2 24/24] blk: Rename if_type to uclass_id   Tom Rini
  • [Uboot-stm32] [PATCH v2 24/24] blk: Rename if_type to uclass_id   AKASHI Takahiro
  • [Uboot-stm32] [PATCH v2 24/24] blk: Rename if_type to uclass_id   Simon Glass
• [Uboot-stm32] [PATCH v3 1/4] gpio: Allow to print pin's label even for pin with GPIOF_FUNC function   Tom Rini
• [Uboot-stm32] [PATCH v3 2/4] gpio: Fix pin's status display for pin with GPIOF_UNUSED function   Tom Rini
• [Uboot-stm32] [PATCH v3 3/4] pinctrl: pinctrl_stm32: Populate uc_priv->name[] with pinmux node's name   Tom Rini
• [Uboot-stm32] [PATCH v3 4/4] gpio: sandbox: Add GPIOD_IS_AF for gpio configured in alternate function   Tom Rini
• [Uboot-stm32] [PATCHv2 1/2] i2c: stm32f7: fix clearing the control register   Patrick DELAUNAY
• [Uboot-stm32] [PULL] Pull request for u-boot master / v2022.10 = u-boot-stm32-20220915   Patrick DELAUNAY
  • [Uboot-stm32] [PULL] Pull request for u-boot master / v2022.10 = u-boot-stm32-20220915   Tom Rini
• [Uboot-stm32] [PATCH 0/4] arm: stm32mp: adapt the command stm32key for STM32MP13x   Patrick Delaunay
  • [Uboot-stm32] [PATCH 1/4] arm: stm32mp: add defines for BSEC_LOCK status in stm32key command   Patrick Delaunay
    • [Uboot-stm32] [PATCH 1/4] arm: stm32mp: add defines for BSEC_LOCK status in stm32key command   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 2/4] arm: stm32mp: introduced read_close_status function in stm32key command   Patrick Delaunay
    • [Uboot-stm32] [PATCH 2/4] arm: stm32mp: introduced read_close_status function in stm32key command   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 3/4] arm: stm32mp: support several key in command stm32key   Patrick Delaunay
    • [Uboot-stm32] [PATCH 3/4] arm: stm32mp: support several key in command stm32key   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 4/4] arm: stm32mp: adapt the command stm32key for STM32MP13x   Patrick Delaunay
    • [Uboot-stm32] [PATCH 4/4] arm: stm32mp: adapt the command stm32key for STM32MP13x   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 0/4] arm: stm32mp: adapt the command stm32key for STM32MP13x   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp1: cleanup config file   Patrick Delaunay
  • [Uboot-stm32] [PATCH] configs: stm32mp1: cleanup config file   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] configs: stm32mp1: cleanup config file   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 1/1] blk: Rename if_type to uclass_id   Simon Glass
  • [Uboot-stm32] [PATCH v3 1/1] blk: Rename if_type to uclass_id   AKASHI Takahiro
    • [Uboot-stm32] [PATCH v3 1/1] blk: Rename if_type to uclass_id   Simon Glass
      • [Uboot-stm32] [PATCH v3 1/1] blk: Rename if_type to uclass_id   AKASHI Takahiro
• [Uboot-stm32] [PATCH v4 0/1] blk: Rationalise the block interface   Simon Glass
  • [Uboot-stm32] [PATCH v4 1/1] blk: Rename if_type to uclass_id   Simon Glass
    • [Uboot-stm32] [PATCH v4 1/1] blk: Rename if_type to uclass_id   Simon Glass
• [Uboot-stm32] [PATCH v1 0/6] SPL fixes for STM32F7 MCUs   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 1/6] configs: stm32f746-disco: Fix SPL boot   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 2/6] configs: stm32f769-disco: Fix SPL boot   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 3/6] configs: stm32746g-eval: Fix SPL boot   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 4/6] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 5/6] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice Chotard
  • [Uboot-stm32] [PATCH v1 6/6] config: stm32f769-disco: Fix internal flash size   Patrice Chotard
• [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply   Patrick Delaunay
  • [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 0/7] SPL fixes for STM32F7 MCUs   Patrice Chotard
  • [Uboot-stm32] [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 1/7] configs: stm32f746-disco: Fix SPL boot   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 2/7] configs: stm32f769-disco: Fix SPL boot   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 3/7] configs: stm32746g-eval: Fix SPL boot   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 4/7] configs: stm32f746-disco: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 5/7] configs: stm32746g-eval: Fix CONFIG_SYS_SPL_ARGS_ADDR   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 6/7] config: stm32f769-disco: Fix internal flash size   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag   Patrice Chotard
    • [Uboot-stm32] [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v2 7/7] configs: stm32f746-disco: Remove CONFIG_SYS_UBOOT_START flag   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v2 0/7] SPL fixes for STM32F7 MCUs   Waldemar Brodkorb
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: update DDR node   Patrick Delaunay
  • [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: update DDR node   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] ARM: dts: stm32mp15: update DDR node   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32: DT sync with kernel v6.0-rc4 for MCU's boards   Patrice Chotard
  • [Uboot-stm32] [PATCH] ARM: dts: stm32: DT sync with kernel v6.0-rc4 for MCU's boards   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH] ARM: dts: stm32: DT sync with kernel v6.0-rc4 for MCU's boards   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] ARM: dts: stm32: DT sync with kernel v6.0-rc4 for MCU's boards   Patrice CHOTARD
• [Uboot-stm32] [PATCH v4 00/21] Do not stop uclass iteration on error   Michal Suchanek
  • [Uboot-stm32] [PATCH v4 16/21] dm: treewide: Use uclass_first_device_err when accessing one device   Michal Suchanek
  • [Uboot-stm32] [PATCH v5 00/15] Do not stop uclass iteration on error   Michal Suchanek
    • [Uboot-stm32] [PATCH v5 10/15] dm: treewide: Use uclass_first_device_err when accessing one device   Michal Suchanek
      • [Uboot-stm32] [PATCH v5 10/15] dm: treewide: Use uclass_first_device_err when accessing one device   Simon Glass
    • [Uboot-stm32] [PATCH v5 00/15] Do not stop uclass iteration on error   Simon Glass
• [Uboot-stm32] [PATCH] configs: increase SYS_MALLOC_F_LEN for STM32 MCU's board   Patrice Chotard
  • [Uboot-stm32] [PATCH] configs: increase SYS_MALLOC_F_LEN for STM32 MCU's board   Patrick DELAUNAY
    • [Uboot-stm32] [PATCH] configs: increase SYS_MALLOC_F_LEN for STM32 MCU's board   Patrice CHOTARD
• [Uboot-stm32] [PATCH] fdt_support: cosmetic: remove fdt_fixup_nor_flash_size prototype   Patrick Delaunay
  • [Uboot-stm32] [PATCH] fdt_support: cosmetic: remove fdt_fixup_nor_flash_size prototype   Simon Glass
• [Uboot-stm32] [PATCH] firmware: scmi: fix the multi channel support with CCF   Patrick Delaunay

Last message date: Fri Sep 30 07:36:38 UTC 2022
Archived on: Fri Sep 30 07:36:56 UTC 2022

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...