October 2020 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Oct 1 14:10:05 UTC 2020
Ending: Fri Oct 30 18:15:43 UTC 2020
Messages: 230

• [Uboot-stm32] [PATCH 1/2] hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files   Oleksandr Andrushchenko
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ard Biesheuvel
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] gpio: stm32: cosmetic: cleanup gpio_stm32_probe   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] gpio: stm32: check result of ofnode_phandle_args   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] pinctrl: stm32: Convert to use APIs which support live DT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] pinctrl: stm32: Add header with SPDX licence   Patrice CHOTARD
• [Uboot-stm32] [PATCH] mailbox: stm32_ipcc: Convert to use APIs which support live DT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/4] configs: stm32mp1: enable fastboot support of eMMC boot partition   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/4] configs: stm32mp1: enable the fastboot oem command format   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/4] configs: stm32mp1: enable the fastboot oem command partconf   Patrice CHOTARD
• [Uboot-stm32] [PATCH 4/4] configs: stm32mp1: enable the fastboot oem command bootbus   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp: limit size of cacheable DDR in pre-reloc stage   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/3] reset: stm32: Add support of MCU HOLD BOOT   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/3] remoteproc: stm32: use reset for hold boot   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/3] remoteproc: stm32: update error management in stm32_copro_start   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: no MTD partitions fixup for serial boot   Patrice CHOTARD
• [Uboot-stm32] [PATCH] phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off   Patrice CHOTARD
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ELF   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp: stm32prog: accept device without partition   Patrice CHOTARD
• [Uboot-stm32] [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrice CHOTARD
• [Uboot-stm32] [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32: cleanup arch gpio.h   Patrice CHOTARD
• [Uboot-stm32] [PATCH 01/33] arm: stm32mp: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 02/33] arm: stm32mp: migrate cmd_stm32prog to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 03/33] arm: stm32mp: bsec: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 06/33] remoproc: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 07/33] ram: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 08/33] ram: stm32mp1: migrate trace to dev or log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 10/33] timer: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 11/33] hwspinlock: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 12/33] rtc: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 13/33] watchdog: stm32mp: migrate trace to dev macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 14/33] power: regulator: stm32-verfbuf: define LOG_CATEGORY   Patrice CHOTARD
• [Uboot-stm32] [PATCH 15/33] misc: rcc: migrate trace to dev macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 16/33] misc: rcc: keep the rcc device name for subnode   Patrice CHOTARD
• [Uboot-stm32] [PATCH 17/33] clk: stm32mp1: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 18/33] clk: clk_stm32f: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 19/33] clk: clk_stm32h7: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 20/33] reset: stm32-reset: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 21/33] mailbox: stm32-ipcc: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 22/33] i2c: stm32f7_i2c: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 24/33] spi: stm32_spi: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 25/33] spi: stm32_qspi: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 26/33] mtd: stm32_fmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 27/33] memory: stm32-fmc2: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 28/33] serial: stm32: define LOG_CATEGORY   Patrice CHOTARD
• [Uboot-stm32] [PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 31/33] board: st: stm32mp1: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 32/33] board: st: common: migrate trace to dev and log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 33/33] configs: stm32mp15: enable LOG features   Patrice CHOTARD
• [Uboot-stm32] [PATCH 04/33] pinctrl: stm32: migrate trace to log macro   Patrice CHOTARD
• [Uboot-stm32] [PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro   Philippe CORNU
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Etienne Carriere
• [Uboot-stm32] stm32mp: The purpose of "!tee_find_device()"   Etienne Carriere
• [Uboot-stm32] [PATCH] board: stm32pm1: update USB-C power detection algorithm on DK boards   Patrice Chotard
• [Uboot-stm32] [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [Uboot-stm32] [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20201002   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] video: stm32_ltdc: Convert to use APIs which support live DT   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/2] video: stm32_dsi: Convert to use APIs which support live DT   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] mailbox: stm32_ipcc: Convert to use APIs which support live DT   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] pinctrl: stm32: Convert to use APIs which support live DT   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/2] pinctrl: stm32: Add header with SPDX licence   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] gpio: stm32: cosmetic: cleanup gpio_stm32_probe   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/2] gpio: stm32: check result of ofnode_phandle_args   Patrick DELAUNAY
• [Uboot-stm32] [PULL] Pull request for u-boot-stm/next = u-boot-stm32-20201003   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] configs: stm32mp: force empty PREBOOT   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v2 2/2] mmc: stm32_sdmmc2: Use mmc_of_parse() to read host capabilities   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] board: stm32pm1: update USB-C power detection algorithm on DK boards   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] arm: stm32: cleanup arch gpio.h   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ELF   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] stm32mp: stm32prog: accept device without partition   Patrick DELAUNAY
• [Uboot-stm32] [PULL] Pull request for u-boot master = u-boot-stm32-20201021   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 2/2] gpio: stm32: correct the bias management   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick DELAUNAY
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] arm: stm32: cleanup arch gpio.h   Patrick Delaunay
• [Uboot-stm32] [PATCH] MAINTAINERS: Add STM32MP1 RNG driver in stm32mp platform   Patrick Delaunay
• [Uboot-stm32] [PATCH] MAINTAINERS: Add stm32 and stm regexp for ARM STM STM32MP platform   Patrick Delaunay
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/7] lmb: Add support of flags for no-map properties   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/7] lmb: add lmb_is_reserved_flags   Patrick Delaunay
• [Uboot-stm32] [PATCH 3/7] lmb: remove lmb_region.size   Patrick Delaunay
• [Uboot-stm32] [PATCH 4/7] lmb: add lmb_dump_region() function   Patrick Delaunay
• [Uboot-stm32] [PATCH 5/7] test: lmb: add test for lmb_reserve_flags   Patrick Delaunay
• [Uboot-stm32] [PATCH 6/7] image-fdt: save no-map parameter of reserve-memory   Patrick Delaunay
• [Uboot-stm32] [PATCH 7/7] arm: cache: cp15: don't map the reserved region with no-map property   Patrick Delaunay
• [Uboot-stm32] [PATCH] configs: stm32mp: force empty PREBOOT   Patrick Delaunay
• [Uboot-stm32] [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Patrick Delaunay
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Patrick Delaunay
• [Uboot-stm32] [PATCH 01/33] arm: stm32mp: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 02/33] arm: stm32mp: migrate cmd_stm32prog to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 03/33] arm: stm32mp: bsec: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 04/33] pinctrl: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 06/33] remoproc: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 07/33] ram: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 08/33] ram: stm32mp1: migrate trace to dev or log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 10/33] timer: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 11/33] hwspinlock: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 12/33] rtc: stm32: migrate trace to log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 13/33] watchdog: stm32mp: migrate trace to dev macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 14/33] power: regulator: stm32-verfbuf: define LOG_CATEGORY   Patrick Delaunay
• [Uboot-stm32] [PATCH 15/33] misc: rcc: migrate trace to dev macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 16/33] misc: rcc: keep the rcc device name for subnode   Patrick Delaunay
• [Uboot-stm32] [PATCH 17/33] clk: stm32mp1: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 18/33] clk: clk_stm32f: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 19/33] clk: clk_stm32h7: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 20/33] reset: stm32-reset: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 21/33] mailbox: stm32-ipcc: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 22/33] i2c: stm32f7_i2c: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 24/33] spi: stm32_spi: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 25/33] spi: stm32_qspi: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 26/33] mtd: stm32_fmc2: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 27/33] memory: stm32-fmc2: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 28/33] serial: stm32: define LOG_CATEGORY   Patrick Delaunay
• [Uboot-stm32] [PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 30/33] video: stm32_dsi: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 31/33] board: st: stm32mp1: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 32/33] board: st: common: migrate trace to dev and log macro   Patrick Delaunay
• [Uboot-stm32] [PATCH 33/33] configs: stm32mp15: enable LOG features   Patrick Delaunay
• [Uboot-stm32] [PATCH] stm32mp: stm32prog: accept device without partition   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] configs: stm32mp15: activate CMD_IMPORTENV   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/2] configs: stm32mp15: activate CMD_EXPORTENV   Patrick Delaunay
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ELF   Patrick Delaunay
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Patrick Delaunay
• [Uboot-stm32] [PATCH] phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off   Patrick Delaunay
• [Uboot-stm32] [PATCH] board: stm32mp1: no MTD partitions fixup for serial boot   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/3] reset: stm32: Add support of MCU HOLD BOOT   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/3] remoteproc: stm32: use reset for hold boot   Patrick Delaunay
• [Uboot-stm32] [PATCH 3/3] remoteproc: stm32: update error management in stm32_copro_start   Patrick Delaunay
• [Uboot-stm32] [PATCH] spi: migrate trace to dev and log macro in spi uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/2] cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] pinctrl: stm32: display bias information for all pins   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/2] gpio: stm32: correct the bias management   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] pinctrl: stmfx: update pincontrol and gpio device name   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/2] pinctrl: stmfx: update pin name   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] cmd: pinmux: update result of do_status   Patrick Delaunay
• [Uboot-stm32] [PATCH 2/2] cmd: pinmux: support pin name in status command   Patrick Delaunay
• [Uboot-stm32] [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and log macro   Peng Fan
• [Uboot-stm32] [PATCH 1/2] mmc: mmc_of_parse: Enable 52 MHz support with "cap-mmc-highspeed"   Peng Fan
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Ahmad Fatoum
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Jerome Forissier
• [Uboot-stm32] stm32mp: The purpose of "!tee_find_device()"   Alex G.
• [Uboot-stm32] [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Richard Genoud
• [Uboot-stm32] [PATCH] SPL: stm32mp1: fix spl_mmc_boot_partition not defined   Richard Genoud
• [Uboot-stm32] [PATCH 1/3] dm: add cells_count parameter in *_count_phandle_with_args   Simon Glass
• [Uboot-stm32] [PATCH 2/3] fdtdec: correct test on return of fdt_node_offset_by_phandle   Simon Glass
• [Uboot-stm32] [PATCH 3/3] test: dm: add test for phandle access functions   Simon Glass
• [Uboot-stm32] [PATCH 1/3] configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs   Simon Glass
• [Uboot-stm32] [PATCH 2/3] configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs   Simon Glass
• [Uboot-stm32] [PATCH 3/3] configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs   Simon Glass
• [Uboot-stm32] [PATCH 3/3] test: dm: add test for phandle access functions   Simon Glass
• [Uboot-stm32] [PATCH 2/3] fdtdec: correct test on return of fdt_node_offset_by_phandle   Simon Glass
• [Uboot-stm32] [PATCH] dm: update test on of_offset in ofnode_valid   Simon Glass
• [Uboot-stm32] [PATCH 1/1] common: rename getc() to getchar()   Simon Glass
• [Uboot-stm32] [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Simon Glass
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Simon Glass
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Simon Glass
• [Uboot-stm32] [PATCH 2/2] cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2   Simon Glass
• [Uboot-stm32] [PATCH 00/33] stm32: enable logging features   Simon Glass
• [Uboot-stm32] [PATCH 1/3] configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs   Anatolij Gustschin
• [Uboot-stm32] [PATCH 2/3] configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs   Anatolij Gustschin
• [Uboot-stm32] [PATCH 3/3] configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs   Anatolij Gustschin
• [Uboot-stm32] [PATCH] net: dwc_eth_qos: Convert to use APIs which support live DT   Tom Rini
• [Uboot-stm32] [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20201002   Tom Rini
• [Uboot-stm32] [PULL] Pull request for u-boot-stm/next = u-boot-stm32-20201003   Tom Rini
• [Uboot-stm32] [PATCH 1/1] common: rename getc() to getchar()   Tom Rini
• [Uboot-stm32] [PATCH] configs: stm32mp: force empty PREBOOT   Tom Rini
• [Uboot-stm32] [PULL] Pull request for u-boot master = u-boot-stm32-20201021   Tom Rini
• [Uboot-stm32] [PATCH 1/1] common: rename getc() to getchar()   Tom Rini
• [Uboot-stm32] [PATCH] Remove default value of CONFIG_PREBOOT for CONFIG_USB_STORAGE   Tom Rini
• [Uboot-stm32] [PATCH 1/2] power: regulator: gpio-regulator: protect count value   Tom Rini
• [Uboot-stm32] [PATCH 2/2] power: regulator: gpio-regulator: Convert to use APIs which support live DT   Tom Rini
• [Uboot-stm32] [PATCH] i2c: i2c-gpio: Convert to use APIs which support live DT   Tom Rini
• [Uboot-stm32] [PATCH 0/7] arm: cache: cp15: don't map reserved region with no-map property   Tom Rini
• [Uboot-stm32] [PATCH 1/1] common: rename getc() to getchar()   Heinrich Schuchardt
• [Uboot-stm32] [PATCH] spi: migrate trace to dev and log macro in spi uclass   Jagan Teki
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Marek Vasut
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Marek Vasut
• [Uboot-stm32] [PATCH] usb: dwc2: add "u-boot, force-vbus-detection" for stm32   Marek Vasut

Last message date: Fri Oct 30 18:15:43 UTC 2020
Archived on: Mon Nov 2 08:03:37 UTC 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...