July 2020 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Jul 1 11:10:10 UTC 2020
Ending: Fri Jul 31 21:42:01 UTC 2020
Messages: 209

• [Uboot-stm32] [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrick Delaunay
  • [Uboot-stm32] [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] ARM: dts: stm32mp: remove hnp-srp-disable for usbotg on dk1   Patrice CHOTARD
• [Uboot-stm32] [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Patrick Delaunay
  • [Uboot-stm32] [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Simon Glass
  • [Uboot-stm32] [PATCH] video: restore CONFIG_VIDCONSOLE_AS_LCD as boolean   Tom Rini
• [Uboot-stm32] [PATCH v3] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
  • [Uboot-stm32] [PATCH v3] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
• [Uboot-stm32] [PATCH v4] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
  • [Uboot-stm32] [PATCH v5] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
    • [Uboot-stm32] [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Marcin Sloniewski
      • [Uboot-stm32] [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrick DELAUNAY
      • [Uboot-stm32] [PATCH v6] ARM: dts: stm32: add seeed studio odyssey-stm32mp157c board   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: move type-c stusb1600 controller code in a driver   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: protect DBGMCU_IDC access with BSEC   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: stm32prog: add "Device Name" in iproduct during DFU USB enumeration   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: st: stm32mp1: increase teed partition   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: use the command env info -q in env_check   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/2] stm32mp1: use the command env info in env_check   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: configs: activate CMD_ERASEENV   Patrice CHOTARD
• [Uboot-stm32] [PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling   Patrice CHOTARD
  • [Uboot-stm32] [PATCH] power: regulator: stm32: vrefbuf: fix a possible overshoot when re-enabling   Jaehoon Chung
• [Uboot-stm32] [PATCH 1/4] ram: stm32mp1: protect minimum value in get_bufsize   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus   Patrice CHOTARD
• [Uboot-stm32] [PATCH 4/4] ram: stm32mp1: add size and addr parameter to test all   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp1: activate WATCHDOG   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 02/11] board: stm32mp1: update the gpio hog support   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 03/11] gpio: stm32: add ops set_dir_flags   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 04/11] gpio: stm32: add ops get_dir_flags   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 11/11] pinctrl: stm32: add information on pin configuration   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: dh_stm32mp1: update the gpio hog support   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 1/9] arm: stm32mp: spl: add bsec driver in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] board: dh_stm32mp1: update the gpio hog support   Patrick Delaunay
• [Uboot-stm32] [PATCH v2 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 1/2] cmd: env: use ENV_IS_IN_DEVICE in env info   Tom Rini
• [Uboot-stm32] [PATCH v2 2/2] stm32mp1: use the command env info in env_check   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 2/2] stm32mp1: use the command env info in env_check   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2] stm32mp1: use the command env info -q in env_check   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2] stm32mp1: use the command env info -q in env_check   Patrice CHOTARD
• [Uboot-stm32] [PATCH] patman: Detect unexpected END   Patrick Delaunay
  • [Uboot-stm32] [PATCH] patman: Detect unexpected END   Simon Glass
• [Uboot-stm32] [PATCH] Add information for skipped commit options   Patrick Delaunay
  • [Uboot-stm32] [PATCH] Add information for skipped commit options   Simon Glass
• [Uboot-stm32] [PATCH v2 1/4] ram: stm32mp1: protect minimum value in get_bufsize   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 2/4] ram: stm32mp1: add parameter addr in test FrequencySelectivePattern   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 3/4] ram: stm32mp1: use the DDR size by default in the test addressBus   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2 4/4] ram: stm32mp1: add size and addr parameter to test all   Patrick Delaunay
• [Uboot-stm32] [PATCH v2 6/9] board: st: stpmic1: add function stpmic1_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 7/9] board: stm32mp1: update vddcore in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 8/9] ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 9/9] board: stm32mp1: move the function board_debug_uart_init in spl.c   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 0/7] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 1/7] phy: generic: add error trace to detect PHY issue in uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 2/7] board: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 3/7] usb: host: ohci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 4/7] usb: host: ehci-hcd: change trace level for phy errors managed by uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 5/7] ata: dwc-ahci: change trace level for phy errors managed by uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 6/7] usb: musb-new: sunxi: change trace level for phy errors managed by uclass   Patrick Delaunay
• [Uboot-stm32] [PATCH v3 7/7] arm: meson: change trace level for phy errors managed by uclass   Patrick Delaunay
  • [Uboot-stm32] [PATCH v3 7/7] arm: meson: change trace level for phy errors managed by uclass   Neil Armstrong
• [Uboot-stm32] [PATCH] board: update test on misc_read result in board_late_init   Patrick Delaunay
  • [Uboot-stm32] [PATCH] board: update test on misc_read result in board_late_init   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] board: update test on misc_read result in board_late_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrick Delaunay
  • [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supply   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrick Delaunay
  • [Uboot-stm32] [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] arm: stm32mp: stm32prog: check result of find_mmc_device   Patrice CHOTARD
• [Uboot-stm32] [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrick Delaunay
  • [Uboot-stm32] [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Patrick Delaunay
    • [Uboot-stm32] [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Heiko Schocher
    • [Uboot-stm32] [PATCH 2/3] i2c: stm32f7: add stm32mp15 compatible   Heiko Schocher
  • [Uboot-stm32] [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrick Delaunay
    • [Uboot-stm32] [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrice CHOTARD
      • [Uboot-stm32] [PATCH 3/3] ARM: dts: stm32mp1: DT alignment with Linux kernel v5.8-rc1   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 1/3] ARM: dts: rename stm32mp15xx-avenger96 ethernet0_rgmii_pins   Patrice CHOTARD
• [Uboot-stm32] [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Patrick Delaunay
  • [Uboot-stm32] [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Heiko Schocher
    • [Uboot-stm32] [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Patrick DELAUNAY
  • [Uboot-stm32] [PATCH] i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7   Heiko Schocher
• [Uboot-stm32] [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrick Delaunay
  • [Uboot-stm32] [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] ARM: dts: stm32: add reset support to uart nodes on stm32mp15x   Patrice CHOTARD
• [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrick Delaunay
  • [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] configs: stm32mp15: activate CMD_ADTIMG   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 11/14] test: environment in ext4   Stephen Warren
• [Uboot-stm32] [PATCH v3 14/14] test: sandbox: add test for erase command   Stephen Warren
• [Uboot-stm32] [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrick Delaunay
  • [Uboot-stm32] [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] arm: stm32mp: use correct weak function name spl_board_prepare_for_linux   Patrice CHOTARD
• [Uboot-stm32] [PATCH] arm: k3: use correct weak function name spl_board_prepare_for_linux   Patrick Delaunay
  • [Uboot-stm32] [PATCH] arm: k3: use correct weak function name spl_board_prepare_for_linux   Lokesh Vutla
• [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrick Delaunay
• [Uboot-stm32] [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrick Delaunay
  • [Uboot-stm32] [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v2] Revert "ARM: dts: stm32: Reinstate card detect behavior on DHSOM"   Patrice CHOTARD
• [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrick Delaunay
  • [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] Revert "ARM: dts: stm32: Reinstate card detect behavior on ST boards"   Patrice CHOTARD
• [Uboot-stm32] [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Tom Rini
  • [Uboot-stm32] [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
    • [Uboot-stm32] [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Tom Rini
    • [Uboot-stm32] [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
  • [Uboot-stm32] [PATCH v4 1/5] cmd: bind: allow to bind driver with driver data   Patrice CHOTARD
• [Uboot-stm32] [PATCH] psci: put psci_method in .data section if EFI_LOADER is not enabled   Patrick Delaunay
• [Uboot-stm32] [PATCH] Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig   Tom Rini
• [Uboot-stm32] [PATCH 00/31] dm: Avoid including dm.h in header files   Simon Glass
  • [Uboot-stm32] [PATCH 04/31] mtd: spi-mem: Drop dm.h header file   Simon Glass
  • [Uboot-stm32] [PATCH 10/31] sf: Drop dm.h header file from spi_flash.h   Simon Glass
  • [Uboot-stm32] [PATCH 22/31] adc: Drop dm.h header file   Simon Glass
• [Uboot-stm32] [PATCH] configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file   Chubb, Peter (Data61, Kensington NSW)
• [Uboot-stm32] [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrick Delaunay
  • [Uboot-stm32] [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] arm: stm32mp: move dbgmcu_init call when DT is ready   Patrice CHOTARD
• [Uboot-stm32] [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrick Delaunay
  • [Uboot-stm32] [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrice CHOTARD
    • [Uboot-stm32] [PATCH] stm32mp1: mmu_set_region_dcache_behaviour   Patrice CHOTARD
• [Uboot-stm32] [PATCH v3 05/14] env: nowhere: add .load ops   Tom Rini
• [Uboot-stm32] [PATCH] env: correct overflow check of env_has_init size   Tom Rini
• [Uboot-stm32] [PATCH] env: add failing trace in env_save   Tom Rini
• [Uboot-stm32] [RESEND PATCH 1/3] env: mmc: allow support of mmc_get_env_dev with OF_CONTROL   Tom Rini
• [Uboot-stm32] [RESEND PATCH 2/3] env: mmc: correct the offset returned by mmc_offset_try_partition   Tom Rini
• [Uboot-stm32] [RESEND PATCH 3/3] env: mmc: add redundancy support in mmc_offset_try_partition   Tom Rini
• [Uboot-stm32] [RESEND PATCH v5 1/4] cmd: env: add option for quiet output on env info   Tom Rini
• [Uboot-stm32] [RESEND PATCH v5 2/4] cmd: env: check real location for env info command   Tom Rini
• [Uboot-stm32] [RESEND PATCH v5 3/4] configs: sandbox: Enable sub command 'env info'   Tom Rini
• [Uboot-stm32] [RESEND PATCH v5 4/4] test: env: add test for env info sub-command   Tom Rini
• [Uboot-stm32] [PATCH v5 0/5] cmd: bind allow to bind driver with driver_data   Patrice Chotard
• [Uboot-stm32] [PATCH v5 1/5] cmd: bind: allow to bind driver with driver data   Patrice Chotard
• [Uboot-stm32] [PATCH v5 2/5] sandbox: phy: add driver_data for bind test cmd   Patrice Chotard
• [Uboot-stm32] [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node   Patrice Chotard
• [Uboot-stm32] [PATCH v5 4/5] test/py: Update test_bind   Patrice Chotard
• [Uboot-stm32] [PATCH v5 5/5] doc: add bind/unbind command documentation   Patrice Chotard
• [Uboot-stm32] [PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice CHOTARD
• [Uboot-stm32] [PATCH v4 00/14] env: ext4: corrections and add test for env in ext4   Patrick Delaunay
• [Uboot-stm32] [PATCH v4 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 01/14] env: add absolute path at CONFIG_ENV_EXT4_FILE   Tom Rini
• [Uboot-stm32] [PATCH v4 02/14] env: ext4: set gd->env_valid   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 02/14] env: ext4: set gd->env_valid   Tom Rini
• [Uboot-stm32] [PATCH v4 03/14] env: sf: avoid space in backend name   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 03/14] env: sf: avoid space in backend name   Tom Rini
• [Uboot-stm32] [PATCH v4 04/14] env: correctly handle env_load_prio   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 04/14] env: correctly handle env_load_prio   Tom Rini
• [Uboot-stm32] [PATCH v4 05/14] env: nowhere: add .load ops   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 05/14] env: nowhere: add .load ops   Tom Rini
• [Uboot-stm32] [PATCH v4 06/14] env: the ops driver load becomes mandatory in struct env_driver   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 06/14] env: the ops driver load becomes mandatory in struct env_driver   Tom Rini
• [Uboot-stm32] [PATCH v4 07/14] cmd: env: add env load command   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 07/14] cmd: env: add env load command   Tom Rini
• [Uboot-stm32] [PATCH v4 08/14] cmd: env: add env select command   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 08/14] cmd: env: add env select command   Tom Rini
• [Uboot-stm32] [PATCH v4 09/14] configs: sandbox: activate env in ext4 support   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 09/14] configs: sandbox: activate env in ext4 support   Tom Rini
• [Uboot-stm32] [PATCH v4 10/14] configs: sandbox: activate command env select and env load   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 10/14] configs: sandbox: activate command env select and env load   Tom Rini
• [Uboot-stm32] [PATCH v4 11/14] test: environment in ext4   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 11/14] test: environment in ext4   Tom Rini
• [Uboot-stm32] [PATCH v4 12/14] env: ext4: introduce new function env_ext4_save_buffer   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 12/14] env: ext4: introduce new function env_ext4_save_buffer   Tom Rini
• [Uboot-stm32] [PATCH v4 13/14] env: ext4: add support of command env erase   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 13/14] env: ext4: add support of command env erase   Tom Rini
• [Uboot-stm32] [PATCH v4 14/14] test: sandbox: add test for erase command   Patrick Delaunay
  • [Uboot-stm32] [PATCH v4 14/14] test: sandbox: add test for erase command   Tom Rini
• [Uboot-stm32] [PATCH v2 1/3] stm32mp1: board: add support of CONFIG_ENV_IS_IN_MMC   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 2/3] stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 3/3] configs:stm32mp1: activate env config in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: use const for struct node_info   Patrick Delaunay
• [Uboot-stm32] [PATCH] board: stm32mp1: remove board.c   Patrick Delaunay
• [Uboot-stm32] [PATCH 1/2] cmd: clk: cosmetic: correct code alignment in show_clks   Patrick Delaunay
  • [Uboot-stm32] [PATCH 2/2] cmd: clk: correctly handle depth for clk dump   Patrick Delaunay
• [Uboot-stm32] [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice Chotard
  • [Uboot-stm32] [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Marek Vasut
• [Uboot-stm32] [PATCH 00/11] Add STM32 FMC2 EBI controller driver   Christophe Kerello
  • [Uboot-stm32] [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow   Christophe Kerello
  • [Uboot-stm32] [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments   Christophe Kerello
  • [Uboot-stm32] [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts   Christophe Kerello
  • [Uboot-stm32] [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant   Christophe Kerello
  • [Uboot-stm32] [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros   Christophe Kerello
  • [Uboot-stm32] [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32   Christophe Kerello
  • [Uboot-stm32] [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver   Christophe Kerello
  • [Uboot-stm32] [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node   Christophe Kerello
  • [Uboot-stm32] [PATCH 09/11] board: stm32mp1: update fdt fixup partitions table   Christophe Kerello
  • [Uboot-stm32] [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI   Christophe Kerello
  • [Uboot-stm32] [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c   Christophe Kerello
• [Uboot-stm32] [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check   Patrick Delaunay
  • [Uboot-stm32] [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected   Patrick Delaunay
  • [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power   Patrick Delaunay
  • [Uboot-stm32] [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init   Patrick Delaunay
  • [Uboot-stm32] [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf   Patrick Delaunay
  • [Uboot-stm32] [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix   Patrick Delaunay
  • [Uboot-stm32] [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init   Patrick Delaunay
  • [Uboot-stm32] [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions   Patrick Delaunay
  • [Uboot-stm32] [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup   Patrick Delaunay
  • [Uboot-stm32] [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef   Patrick Delaunay
  • [Uboot-stm32] [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef   Patrick Delaunay
• [Uboot-stm32] [RESEND PATCH] env: add prototypes for weak function   Tom Rini

Last message date: Fri Jul 31 21:42:01 UTC 2020
Archived on: Fri Jul 31 21:42:07 UTC 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...