[Linux-stm32] [PATCH] dt-bindings: Use hex unit address patterns

[Krzysztof Kozlowski]

On Mon, Nov 02, 2026 at 07:53:22AM -0600, Rob Herring (Arm) wrote:
> Unit-addresses by default (and most commonly) are hexadecimal. There's a
> number of cases using decimal patterns. Fix all of them, limiting the
> pattern to match the 'reg' limits if there are any.
> 
> Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
> ---
>  .../bindings/display/xylon,logicvc-display.yaml      |  2 +-
>  .../devicetree/bindings/dpll/dpll-device.yaml        |  2 +-
>  .../bindings/embedded-controller/google,cros-ec.yaml |  4 ++--
>  .../intel,ixp4xx-network-processing-engine.yaml      |  2 +-
>  Documentation/devicetree/bindings/gpio/gpio-mxs.yaml |  4 ++--
>  .../devicetree/bindings/hwmon/maxim,max31790.yaml    |  2 +-
>  .../devicetree/bindings/iio/adc/st,stm32-adc.yaml    |  2 +-
>  .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml         |  6 +++---
>  .../bindings/input/touchscreen/cypress,tt21000.yaml  |  2 +-
>  .../memory-controllers/ddr/jedec,sdram-channel.yaml  | 12 ++++++------
>  .../bindings/memory-controllers/ingenic,nemc.yaml    |  2 +-
>  .../memory-controllers/nvidia,tegra20-emc.yaml       |  4 ++--
>  .../devicetree/bindings/mfd/st,stm32-lptimer.yaml    |  2 +-
>  .../devicetree/bindings/mfd/st,stm32-timers.yaml     |  2 +-
>  .../devicetree/bindings/misc/qcom,fastrpc.yaml       |  2 +-
>  .../bindings/mmc/mmc-controller-common.yaml          |  2 +-
>  .../bindings/net/cortina,gemini-ethernet.yaml        |  2 +-
>  .../bindings/phy/brcm,cygnus-pcie-phy.yaml           |  2 +-
>  .../devicetree/bindings/phy/brcm,sata-phy.yaml       |  2 +-
>  .../bindings/phy/socionext,uniphier-usb2-phy.yaml    |  2 +-
>  .../devicetree/bindings/sound/qcom,q6asm-dais.yaml   |  2 +-
>  .../bindings/sound/qcom,q6dsp-lpass-ports.yaml       |  2 +-
>  .../devicetree/bindings/thermal/sprd-thermal.yaml    |  2 +-
>  23 files changed, 33 insertions(+), 33 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> index 76b804b7c880..3dd54636d23d 100644
> --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> @@ -123,7 +123,7 @@ properties:
>          const: 0
>  
>      patternProperties:
> -      "^layer@[0-9]+$":
> +      "^layer@[0-9a-f]+$":

These two lines are looking good.

Andy, it's okay if I give Rb tag?

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>

Best regards,
Krzysztof