[Linux-stm32] [net-next v5 2/4] dt-bindings: net: starfive, jh7110-dwmac: Add jhb100 support
Minda Chen
minda.chen at starfivetech.com
Wed May 27 08:41:06 UTC 2026
The jhb100 GMAC still using Synopsys designware GMAC core.
hardware features are similar with jh7100.
Add jhb100 GMAC compatible and reset, interrupts features.
jhb100 dwmac has only one reset signal and one interrupt
line.
jhb100 SGMII interface tx/rx mac clock is split and require to
set clock rate in 10M/100M/1000M speed. So dts need to add a
new rx clock in code, dts and dt binding doc.
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
Acked-by: Conor Dooley <conor.dooley at microchip.com>
---
.../bindings/net/starfive,jh7110-dwmac.yaml | 55 ++++++++++++++-----
1 file changed, 41 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
index 0d1962980f57..fdcc61c65f87 100644
--- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -30,25 +30,33 @@ properties:
- items:
- const: starfive,jh7110-dwmac
- const: snps,dwmac-5.20
+ - items:
+ - const: starfive,jhb100-dwmac
+ - const: starfive,jh7110-dwmac
+ - const: snps,dwmac-5.20
reg:
maxItems: 1
clocks:
+ minItems: 5
items:
- description: GMAC main clock
- description: GMAC AHB clock
- description: PTP clock
- description: TX clock
- description: GTX clock
+ - description: SGMII RX clock
clock-names:
+ minItems: 5
items:
- const: stmmaceth
- const: pclk
- const: ptp_ref
- const: tx
- const: gtx
+ - const: sgmii_rx
starfive,tx-use-rgmii-clk:
description:
@@ -107,20 +115,39 @@ allOf:
contains:
const: starfive,jh7110-dwmac
then:
- properties:
- interrupts:
- minItems: 3
- maxItems: 3
-
- interrupt-names:
- minItems: 3
- maxItems: 3
-
- resets:
- minItems: 2
-
- reset-names:
- minItems: 2
+ if:
+ properties:
+ compatible:
+ contains:
+ const: starfive,jhb100-dwmac
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: stmmaceth
+ else:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ interrupt-names:
+ minItems: 3
+ maxItems: 3
+
+ resets:
+ minItems: 2
+
+ reset-names:
+ minItems: 2
unevaluatedProperties: false
--
2.17.1
More information about the Linux-stm32
mailing list