[Linux-stm32] [net-next v1 0/6] Add synopsys designware GMAC NCSI support

[Minda Chen]

This patch set is for adding jhb100 GMAC NCSI function.
jhb100 is a Starfive new RISC-V SoC for datacenter BMC (BaseBoard
Managent Controller). Similar with Aspeed 27x0.

jhb100 contains 2 synopsys RMII(RGMII can be use as RMII) interfaces
GMAC, can be use as NCSI GMAC (network controller sideband interface),
do not connect with mdio PHY but connect with host server OCP network
device and share with network port.

The code which calling NCSI netdevice API is similar with
driver/net/ethernet/faraday/ftgmac100.c

The NCSI example:
_________________                 _______________
|               |                 |             |           ___________
|       CLK_50M |---------------->|             |<--------->|         |
|        TX_EN  |---------------->|             |<--------->|         |
|        TXD0   |---------------->|  OCP network|<--------->|  RJ45   |
|BMC     TXD1   |---------------->|    device   |<--------->|  port   |
|RMII    CRS_DV |<----------------|             |<--------->|         |
|port    RX_D0  |<----------------|             |<--------->|         |
|        RX_D1  |<----------------|             |<--------->|_________|
|_______________|                 |_____________|
				    | | | | |
                                    | | | | |
				    host server
				    PCIe interface

The jhb100 minimal system upstream is in progress:
https://patchwork.kernel.org/project/linux-riscv/cover/20260508053632.818548-1-changhuang.liang@starfivetech.com/

The patch base net-next (base commit list below)

Minda Chen (6):
  dt-bindings: net: dwmac: Add snps,use-ncsi property
  net: stmmac: Checking whether priv->phylink if NULL in NCSI case
  net: stmmac: Add register NCSI device support
  net: stmmac: Add NCSI VLAN setting
  net: dwmac4: Add NCSI mac speed and duplex setting in NCSI case
  net: stmmac: ethtool: Do NOT call phylink function in NCSI mode.

 .../devicetree/bindings/net/snps,dwmac.yaml   |   7 ++
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  15 ++-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   1 +
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |  32 +++++-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 108 +++++++++++++-----
 .../ethernet/stmicro/stmmac/stmmac_phylink.h  | 106 +++++++++++++++++
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  10 +-
 include/linux/stmmac.h                        |   1 +
 8 files changed, 246 insertions(+), 34 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_phylink.h


base-commit: 903db046d5579bef0ea699eae4b279dd6455fc9f
-- 
2.17.1