[Linux-stm32] [PATCH net-next v2 2/2] net/mlx5: implement swp_l4_csum_mode via devlink params

[Daniel Zahka]

On 11/4/25 6:38 AM, Daniel Zahka wrote:
>
>
> On 11/4/25 5:14 AM, Jiri Pirko wrote:
>> I did some research. 0/DEVICE_DEFAULT should not be ever reported back
>> from FW. It's purpose is for user to reset to default FW configuration.
>> What's the usecase for that? I think you could just avoid
>> 0/DEVICE_DEFAULT entirely, for both get and set.
>
> I find that 0/DEVICE_DEFAULT is reported back on my device. I have 
> observed this same behavior when using the mstconfig tool for setting 
> the parameter too.

e.g.
$ dmesg | grep -i mlx | grep -i firmware
[   10.165767] mlx5_core 0000:01:00.0: firmware version: 28.46.1006

$ ./mstconfig -d 01:00.0 -b ./mlxconfig_host.db query SWP_L4_CHECKSUM_MODE

Device #1:
----------

Device type:        ConnectX7
Name:               CX71143DMC-CDAE_FB_Ax
Description:        ConnectX-7 Ethernet adapter card; 100 GbE OCP3.0; 
Single-port QSFP; Multi Host; 2 Host; PCIe 4.0 x16; Crypto and Secure Boot
Device:             01:00.0

Configurations:                                          Next Boot
         SWP_L4_CHECKSUM_MODE DEVICE_DEFAULT(0)