[Linux-stm32] [net-next PATCH v5 05/10] net: pcs: lynx: Convert to an MDIO driver

[Russell King (Oracle)]

On Fri, May 23, 2025 at 06:07:16PM -0400, Sean Anderson wrote:
> On 5/23/25 17:39, Sean Anderson wrote:
> > On 5/23/25 17:33, Heiner Kallweit wrote:
> >> On 23.05.2025 22:33, Sean Anderson wrote:
> >>> This converts the lynx PCS driver to a proper MDIO driver.
> >>> This allows using a more conventional driver lifecycle (e.g. with a
> >>> probe and remove). It will also make it easier to add interrupt support.
> >>> 
> >>> The existing helpers are converted to bind the MDIO driver instead of
> >>> creating the PCS directly. As lynx_pcs_create_mdiodev creates the PCS
> >>> device, we can just set the modalias. For lynx_pcs_create_fwnode, we try
> >>> to get the PCS the usual way, and if that fails we edit the devicetree
> >>> to add a compatible and reprobe the device.
> >>> 
> >>> To ensure my contributions remain free software, remove the BSD option
> >>> from the license. This is permitted because the SPDX uses "OR".
> >>> 
> >>> Signed-off-by: Sean Anderson <sean.anderson at linux.dev>
> >>> ---
> >>> 
> >>> Changes in v5:
> >>> - Use MDIO_BUS instead of MDIO_DEVICE
> >>> 
> >>> Changes in v4:
> >>> - Add a note about the license
> >>> - Convert to dev-less pcs_put
> >>> 
> >>> Changes in v3:
> >>> - Call devm_pcs_register instead of devm_pcs_register_provider
> >>> 
> >>> Changes in v2:
> >>> - Add support for #pcs-cells
> >>> - Remove unused variable lynx_properties
> >>> 
> >>>  drivers/net/dsa/ocelot/Kconfig                |   4 +
> >>>  drivers/net/dsa/ocelot/felix_vsc9959.c        |  11 +-
> >>>  drivers/net/dsa/ocelot/seville_vsc9953.c      |  11 +-
> >>>  drivers/net/ethernet/altera/Kconfig           |   2 +
> >>>  drivers/net/ethernet/altera/altera_tse_main.c |   7 +-
> >>>  drivers/net/ethernet/freescale/dpaa/Kconfig   |   2 +-
> >>>  drivers/net/ethernet/freescale/dpaa2/Kconfig  |   3 +
> >>>  .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  11 +-
> >>>  drivers/net/ethernet/freescale/enetc/Kconfig  |   2 +
> >>>  .../net/ethernet/freescale/enetc/enetc_pf.c   |   8 +-
> >>>  .../net/ethernet/freescale/enetc/enetc_pf.h   |   1 -
> >>>  .../freescale/enetc/enetc_pf_common.c         |   4 +-
> >>>  drivers/net/ethernet/freescale/fman/Kconfig   |   4 +-
> >>>  .../net/ethernet/freescale/fman/fman_memac.c  |  25 ++--
> >>>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   3 +
> >>>  .../ethernet/stmicro/stmmac/dwmac-socfpga.c   |   6 +-
> >>>  drivers/net/pcs/Kconfig                       |  11 +-
> >>>  drivers/net/pcs/pcs-lynx.c                    | 110 ++++++++++--------
> >>>  include/linux/pcs-lynx.h                      |  13 ++-
> >>>  19 files changed, 128 insertions(+), 110 deletions(-)
> >>> 
> >>> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> >>> index 081e7a88ea02..907c29d61c14 100644
> >>> --- a/drivers/net/dsa/ocelot/Kconfig
> >>> +++ b/drivers/net/dsa/ocelot/Kconfig
> >>> @@ -42,7 +42,9 @@ config NET_DSA_MSCC_FELIX
> >>>  	select NET_DSA_TAG_OCELOT_8021Q
> >>>  	select NET_DSA_TAG_OCELOT
> >>>  	select FSL_ENETC_MDIO
> >>> +	select PCS
> >>>  	select PCS_LYNX
> >>> +	select MDIO_BUS
> >> 
> >> This shouldn't be needed. NET_DSA selects PHYLINK, which selects PHYLIB,
> >> which selects MDIO_BUS. There are more places in this series where the
> >> same comment applies.
> > 
> > select does not transitively enable dependencies. See the note in
> > Documentation/kbuild/kconfig-language.rst for details. Therefore we must
> > select the dependencies of things we select in order to ensure we do not
> > trip sym_warn_unmet_dep.
> 
> OK, I see what you mean here. But of course NET_DSA is missing selects for
> PHYLIB and MDIO_BUS. And PHYLINK is also missing a select for MDIO_BUS. Actually,
> this bug is really endemic. Maybe we should just get rid of PHYLIB as a config
> and just make everything depend on ETHERNET instead.

You're reading the documentation wrongly.

Take this example:

config A
	select B

config B
	select C
	depends on E

config C
	select D

config D

config E

Enabling A leads to B, C and D all being enabled, but it does *not*
lead to E being enabled - kconfig will issue a warning if E is not
already enabled.

E is a dependency of B. There are no other dependencies, but there
are reverse dependencies, and reverse dependencies are propagated.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!