[Linux-stm32] [PATCH v5 0/4] Add support for Plymovent AQM board

[Alexandre TORGUE]

Hi Oleksij

On 3/5/25 14:14, Oleksij Rempel wrote:
> This patch series adds support for the Plymovent AQM board based on the
> STM32MP151C SoC. Additionally, the ICS-43432 device tree binding is
> converted to YAML to address a validation warning.
> 
> The ICS-43432 patch resolves one of the devicetree validation warnings.
> However, the false-positive warning:
> 
>    "audio-controller at 44004000: port:endpoint: Unevaluated properties are
>     not allowed ('format' was unexpected)"
> 
> remains unresolved. The "format" property is required for proper
> functionality of this device.
> 
> Best regards,
> 
> Oleksij Rempel (4):
>    dt-bindings: sound: convert ICS-43432 binding to YAML
>    dt-bindings: arm: stm32: Add Plymovent AQM board
>    ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
>    arm: dts: stm32: Add Plymovent AQM devicetree
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   1 +
>   .../devicetree/bindings/sound/ics43432.txt    |  19 -
>   .../bindings/sound/invensense,ics43432.yaml   |  51 +++
>   arch/arm/boot/dts/st/Makefile                 |   1 +
>   arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi   | 292 ++++++++++++++
>   arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts   | 376 ++++++++++++++++++
>   6 files changed, 721 insertions(+), 19 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt
>   create mode 100644 Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
>   create mode 100644 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
> 
> --
> 2.39.5
> 

Series applied on stm32-next.

Thanks
Alex