[Linux-stm32] [PATCH v3 0/4] Add support for Priva E-Measuringbox board

[Alexandre TORGUE]

Hi

On 2/3/25 09:58, Oleksij Rempel wrote:
> This patch series introduces support for the Priva E-Measuringbox board
> based on the ST STM32MP133 SoC. The set includes all the necessary
> changes for device tree bindings, vendor prefixes, thermal support, and
> board-specific devicetree to pass devicetree validation and checkpatch
> tests.
> 
> changes v2:
> - drop: dt-bindings: net: Add TI DP83TD510 10BaseT1L PHY
> 
> Oleksij Rempel (2):
>    dt-bindings: vendor-prefixes: Add prefix for Priva
>    dt-bindings: arm: stm32: Add Priva E-Measuringbox board
> 
> Roan van Dijk (2):
>    arm: dts: stm32: Add thermal support for STM32MP131
>    arm: dts: stm32: Add Priva E-Measuringbox devicetree
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
>   arch/arm/boot/dts/st/Makefile                 |   1 +
>   arch/arm/boot/dts/st/stm32mp131.dtsi          |  35 ++
>   arch/arm/boot/dts/st/stm32mp133c-prihmb.dts   | 496 ++++++++++++++++++
>   5 files changed, 540 insertions(+)
>   create mode 100644 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts
> 
> --
> 2.39.5
> 

Series applied on stm32-next.

Cheers
Alex