[Linux-stm32] [PATCH v1 0/3] Add support for Plymovent AQM board

[Oleksij Rempel]

This patch series adds support for the Plymovent AQM board based on the
STM32MP151C SoC. Additionally, the ICS-43432 device tree binding is
converted to YAML to address a validation warning.

The ICS-43432 patch resolves one of the devicetree validation warnings.
However, the false-positive warning:

  "audio-controller at 44004000: port:endpoint: Unevaluated properties are
   not allowed ('format' was unexpected)"

remains unresolved. The "format" property is required for proper
functionality of this device.

Best regards,

Oleksij Rempel (3):
  dt-bindings: sound: convert ICS-43432 binding to YAML
  dt-bindings: arm: stm32: Add Plymovent AQM board
  arm: dts: stm32: Add Plymovent AQM devicetree

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   1 +
 .../devicetree/bindings/sound/ics43432.txt    |  19 -
 .../bindings/sound/invensense,ics43432.yaml   |  51 ++
 arch/arm/boot/dts/st/Makefile                 |   1 +
 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts   | 697 ++++++++++++++++++
 5 files changed, 750 insertions(+), 19 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt
 create mode 100644 Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
 create mode 100644 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts

--
2.39.5