[Linux-stm32] 回复: [PATCH v8 0/9] Add STM32MP25 PCIe drivers

[Hans Zhang]

-----邮件原件-----
发件人: Christian Bruel <christian.bruel at foss.st.com>
发送时间: 2025年4月23日 16:11
收件人: christian.bruel at foss.st.com; lpieralisi at kernel.org; kw at linux.com; manivannan.sadhasivam at linaro.org; robh at kernel.org; bhelgaas at google.com; krzk+dt at kernel.org; conor+dt at kernel.org; mcoquelin.stm32 at gmail.com; alexandre.torgue at foss.st.com; p.zabel at pengutronix.de; thippeswamy.havalige at amd.com; shradha.t at samsung.com; quic_schintav at quicinc.com; cassel at kernel.org; johan+linaro at kernel.org
抄送: linux-pci at vger.kernel.org; devicetree at vger.kernel.org; linux-stm32 at st-md-mailman.stormreply.com; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
主题: [PATCH v8 0/9] Add STM32MP25 PCIe drivers

EXTERNAL EMAIL

this patch depends on patch
https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=953545

Changes in v8:
   - Whitespace in comment

Hi Christian，

The subject of each of your patches is still v7.

e.g.,
https://patchwork.kernel.org/project/linux-pci/patch/20250423081051.3907930-2-christian.bruel@foss.st.com/

Best regards,
Hans

Changes in v7:
   - Use device_init_wakeup to enable wakeup
   - Fix comments (Bjorn)

Changes in v6:
   - Call device_wakeup_enable() to fix WAKE# wakeup.
   Address comments from Manivanna:
   - Fix/Add Comments
   - Fix DT indents
   - Remove dw_pcie_ep_linkup() in EP start link
   - Add PCIE_T_PVPERL_MS delay in RC PERST# deassert

Changes in v5:
   Address driver comments from Manivanna:
   - Use dw_pcie_{suspend/resume}_noirq instead of private ones.
   - Move dw_pcie_host_init() to probe
   - Add stm32_remove_pcie_port cleanup function
   - Use of_node_put in stm32_pcie_parse_port
   - Remove wakeup-source property
   - Use generic dev_pm_set_dedicated_wake_irq to support wake# irq

Changes in v4:
   Address bindings comments Rob Herring
   - Remove phy property form common yaml
   - Remove phy-name property
   - Move wake_gpio and reset_gpio to the host root port

Changes in v3:
   Address comments from Manivanna, Rob and Bjorn:
   - Move host wakeup helper to dwc core (Mani)
   - Drop num-lanes=<1> from bindings (Rob)
   - Fix PCI address of I/O region (Mani)
   - Moved PHY to a RC rootport subsection (Bjorn, Mani)
   - Replaced dma-limit quirk by dma-ranges property (Bjorn)
   - Moved out perst assert/deassert from start/stop link (Mani)
   - Drop link_up test optim (Mani)
   - DT and comments rephrasing (Bjorn)
   - Add dts entries now that the combophy entries has landed
   - Drop delaying Configuration Requests

Changes in v2:
   - Fix st,stm32-pcie-common.yaml dt_binding_check

Changes in v1:
   Address comments from Rob Herring and Bjorn Helgaas:
   - Drop st,limit-mrrs and st,max-payload-size from this patchset
   - Remove single reset and clocks binding names and misc yaml cleanups
   - Split RC/EP common bindings to a separate schema file
   - Use correct PCIE_T_PERST_CLK_US and PCIE_T_RRS_READY_MS defines
   - Use .remove instead of .remove_new
   - Fix bar reset sequence in EP driver
   - Use cleanup blocks for error handling
   - Cosmetic fixes

Christian Bruel (9):
  dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe Endpoint support for STM32MP25
  MAINTAINERS: add entry for ST STM32MP25 PCIe drivers
  arm64: dts: st: add PCIe pinctrl entries in stm32mp25-pinctrl.dtsi
  arm64: dts: st: Add PCIe Rootcomplex mode on stm32mp251
  arm64: dts: st: Add PCIe Endpoint mode on stm32mp251
  arm64: dts: st: Enable PCIe on the stm32mp257f-ev1 board

 .../bindings/pci/st,stm32-pcie-common.yaml    |  33 ++
 .../bindings/pci/st,stm32-pcie-ep.yaml        |  67 +++
 .../bindings/pci/st,stm32-pcie-host.yaml      | 112 +++++
 MAINTAINERS                                   |   7 +
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi |  20 +
 arch/arm64/boot/dts/st/stm32mp251.dtsi        |  57 +++
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  21 +
 drivers/pci/controller/dwc/Kconfig            |  24 +
 drivers/pci/controller/dwc/Makefile           |   2 +
 drivers/pci/controller/dwc/pcie-stm32-ep.c    | 417 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.c       | 370 ++++++++++++++++
 drivers/pci/controller/dwc/pcie-stm32.h       |  16 +
 12 files changed, 1146 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32-ep.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.c
 create mode 100644 drivers/pci/controller/dwc/pcie-stm32.h

--
2.34.1




This email (including its attachments) is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. Unauthorized use, dissemination, distribution or copying of this email or the information herein or taking any action in reliance on the contents of this email or the information herein, by anyone other than the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, is strictly prohibited. If you are not the intended recipient, please do not read, copy, use or disclose any part of this e-mail to others. Please notify the sender immediately and permanently delete this e-mail and any attachments if you received it in error. Internet communications cannot be guaranteed to be timely, secure, error-free or virus-free. The sender does not accept liability for any errors or omissions.