[Linux-stm32] [PATCH net-next] net: stmmac: dwmac-qcom-ethqos: Update link clock rate only for RGMII

[Andrew Lunn]

> >   static void
> >   ethqos_update_link_clk(struct qcom_ethqos *ethqos, unsigned int speed)
> >   {
> > -	switch (speed) {
> > -	case SPEED_1000:
> > -		ethqos->link_clk_rate =  RGMII_1000_NOM_CLK_FREQ;
> > -		break;
> > +	if (phy_interface_mode_is_rgmii(ethqos->phy_mode)) {
> > +		switch (speed) {
> > +		case SPEED_1000:
> > +			ethqos->link_clk_rate =  RGMII_1000_NOM_CLK_FREQ;
> > +			break;
> > -	case SPEED_100:
> > -		ethqos->link_clk_rate =  RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ;
> > -		break;
> > +		case SPEED_100:
> > +			ethqos->link_clk_rate =  RGMII_ID_MODE_100_LOW_SVS_CLK_FREQ;
> > +			break;
> > -	case SPEED_10:
> > -		ethqos->link_clk_rate =  RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ;
> > -		break;
> > -	}
> > +		case SPEED_10:
> > +			ethqos->link_clk_rate =  RGMII_ID_MODE_10_LOW_SVS_CLK_FREQ;
> > +			break;
> > +		}
> > -	clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
> > +		clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
> > +	}
> >   }
> 
> if (!phy_interface_mode_is_rgmii(ethqos->phy_mode))
> 	return 0;

It is a void function, so no 0, but otherwise this does look less
invasive.

   Andrew