[Linux-stm32] [PATCH v5 02/10] ARM: dts: stm32: Add alternate pinmux for sai2b

[Olivier MOYSAN]

Hi Steffen,

You can add my:
Reviewed-by: Olivier Moysan <olivier.moysan at foss.st.com>

BRs
Olivier

On 3/20/23 14:27, Steffen Trumtrar wrote:
> Add another option for the SAI2B pins.
> 
> This is used on the Phycore STM32MP1.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 24 ++++++++++++++++++++++++
>   1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> index 1c97db4dbfc6d..0062f8ea17aab 100644
> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
> @@ -1491,6 +1491,30 @@ pins {
>   		};
>   	};
>   
> +	sai2b_pins_d: sai2b-3 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 2, AF10)>, /* SAI2_SCK_B */
> +				 <STM32_PINMUX('C', 0, AF8)>, /* SAI2_FS_B */
> +				 <STM32_PINMUX('H', 3, AF10)>; /* SAI2_MCLK_B */
> +			slew-rate = <0>;
> +			drive-push-pull;
> +			bias-disable;
> +		};
> +		pins2 {
> +			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
> +			bias-disable;
> +		};
> +	};
> +
> +	sai2b_sleep_pins_d: sai2b-sleep-3 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* SAI2_SCK_B */
> +				 <STM32_PINMUX('C', 0, ANALOG)>, /* SAI2_FS_B */
> +				 <STM32_PINMUX('H', 3, ANALOG)>, /* SAI2_MCLK_B */
> +				 <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
> +		};
> +	};
> +
>   	sai4a_pins_a: sai4a-0 {
>   		pins {
>   			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */