[Linux-stm32] [PATCH 3/5] dt-bindings: iio: correct node names in examples

[Jonathan Cameron]

On Wed, 18 Jan 2023 19:44:11 +0100
Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> wrote:

> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
> examples.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---

> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> index 6c5ad426a016..12f75ddc4a70 100644
> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
> @@ -42,7 +42,7 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        heart_mon at 0 {
> +        heart-rate at 0 {

These are both heart-rate and pulse oximeters so measure more than just
the rate (oxygen saturation in the blood). Reality is they actually
measure light absorption over time, but you can calculate an estimate
of both rate and oxygen saturation from that.

I don't really mind simplifying that to heart-rate, but wanted to
call this out for possible discussion.


>              compatible = "ti,afe4403";
>              reg = <0>;
>              spi-max-frequency = <10000000>;
> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> index c0e815d9999e..b334f3e356ad 100644
> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
> @@ -39,7 +39,7 @@ examples:
>          #address-cells = <1>;
>          #size-cells = <0>;
>  
> -        heart_mon at 58 {
> +        heart-rate at 58 {
>              compatible = "ti,afe4404";
>              reg = <0x58>;
>              tx-supply = <&vbat>;

The rest are all fine.  If no one comments I'll pick this up as it is in a few
days.

Jonathan