[Linux-stm32] [PATCH v2 1/2] iio: adc: stm32-adc: skip adc-diff-channels setup if none is present

[Sean Nyekjaer]

If no adc differential channels are defined driver will fail with EINVAL:
stm32-adc: probe of 48003000.adc:adc at 0 failed with error -22

Fix this by skipping the initialization if no channels are defined.

This applies only to the legacy way of initializing adc channels.

Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties")
Signed-off-by: Sean Nyekjaer <sean at geanix.com>
---
Changes since v1:
 - None

 drivers/iio/adc/stm32-adc.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index e179b6611e4d..14524c1b5583 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -2008,16 +2008,15 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
 	 * to get the *real* number of channels.
 	 */
 	ret = device_property_count_u32(dev, "st,adc-diff-channels");
-	if (ret < 0)
-		return ret;
-
-	ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
-	if (ret > adc_info->max_channels) {
-		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
-		return -EINVAL;
-	} else if (ret > 0) {
-		adc->num_diff = ret;
-		num_channels += ret;
+	if (ret > 0) {
+		ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
+		if (ret > adc_info->max_channels) {
+			dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
+			return -EINVAL;
+		} else if (ret > 0) {
+			adc->num_diff = ret;
+			num_channels += ret;
+		}
 	}
 
 	/* Optional sample time is provided either for each, or all channels */
-- 
2.40.0