[Linux-stm32] [PATCH] pwm: stmpe: Implement .apply() callback

[Uwe Kleine-König]

To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-stmpe.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-stmpe.c b/drivers/pwm/pwm-stmpe.c
index c4336d3bace3..5d4a4762ce0c 100644
--- a/drivers/pwm/pwm-stmpe.c
+++ b/drivers/pwm/pwm-stmpe.c
@@ -259,10 +259,33 @@ static int stmpe_24xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+static int stmpe_24xx_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+				const struct pwm_state *state)
+{
+	int err;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		if (pwm->state.enabled)
+			stmpe_24xx_pwm_disable(chip, pwm);
+
+		return 0;
+	}
+
+	err = stmpe_24xx_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
+	if (err)
+		return err;
+
+	if (!pwm->state.enabled)
+		err = stmpe_24xx_pwm_enable(chip, pwm);
+
+	return err;
+}
+
 static const struct pwm_ops stmpe_24xx_pwm_ops = {
-	.config = stmpe_24xx_pwm_config,
-	.enable = stmpe_24xx_pwm_enable,
-	.disable = stmpe_24xx_pwm_disable,
+	.apply = stmpe_24xx_pwm_apply,
 	.owner = THIS_MODULE,
 };
 

base-commit: 2bf8ee0faa988b5cec3503ebf2f970a0e84d24ee
-- 
2.35.1