[Linux-stm32] [PATCH net 1/1] net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a
David Miller
davem at davemloft.net
Tue May 26 23:28:25 UTC 2020
From: Fugang Duan <fugang.duan at nxp.com>
Date: Mon, 25 May 2020 16:18:14 +0800
> For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be
> PTP v2/802.AS1, any layer, any kind of event packet, but HW only
> take timestamp snapshot for below PTP message: sync, Pdelay_req,
> Pdelay_resp.
>
> Then it causes below issue when test E2E case:
> ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp
> ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp
> ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp
> ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp
> ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp
> ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp
> ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp
> ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp
> ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp
>
> Timestamp snapshot dependency on register bits in received path:
> SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages
> 01 x 0 SYNC, Follow_Up, Delay_Req,
> Delay_Resp, Pdelay_Req, Pdelay_Resp,
> Pdelay_Resp_Follow_Up
> 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp
>
> For dwmac v5.10a, enabling all events by setting register
> DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA]
> to 0’b0, which can support all required events.
>
> Signed-off-by: Fugang Duan <fugang.duan at nxp.com>
Applied and queued up for -stable, thanks.
More information about the Linux-stm32
mailing list