[Linux-stm32] [PATCH V2 22/22] ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

[Marek Vasut]

The LED labels do not match the silkscreen on the board, fix it.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Alexandre Torgue <alexandre.torgue at st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: linux-stm32 at st-md-mailman.stormreply.com
To: linux-arm-kernel at lists.infradead.org
---
V2: No change
---
 arch/arm/boot/dts/stm32mp157a-avenger96.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index b6cb3b2d8c78..4291a97cc05f 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -55,21 +55,21 @@ memory at c0000000 {
 	led {
 		compatible = "gpio-leds";
 		led1 {
-			label = "green:user1";
+			label = "green:user0";
 			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led2 {
-			label = "green:user2";
+			label = "green:user1";
 			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led3 {
-			label = "green:user3";
+			label = "green:user2";
 			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
 			default-state = "off";
-- 
2.25.1