[Linux-stm32] [PATCH] [RFC] ARM: dts: stm32: Add DTs for STM32MP15x variants of the DH SOM and PDK2
Alexandre Torgue
alexandre.torgue at st.com
Tue Mar 24 13:04:53 UTC 2020
On 3/23/20 3:31 AM, Marek Vasut wrote:
> The DH PDK2 can be populated with SoM with any STM32MP15x variant.
> Add the DTs describing the remaining combinations.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
> NOTE: Is there a better way to do this than to have this kind of a
> combinatorial explosion of DTs ?
I have no better idea. Question was the same for stm32 boards, and I
chose to take this option.
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/stm32mp151c-dhcom-pdk2.dts | 8 +
> arch/arm/boot/dts/stm32mp151c-dhcom-som.dtsi | 8 +
> arch/arm/boot/dts/stm32mp153c-dhcom-pdk2.dts | 15 +
> arch/arm/boot/dts/stm32mp153c-dhcom-som.dtsi | 8 +
> arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts | 256 +------------
> arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi | 360 +----------------
> arch/arm/boot/dts/stm32mp15xc-dhcom-pdk2.dtsi | 257 +++++++++++++
> arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 361 ++++++++++++++++++
> 9 files changed, 664 insertions(+), 611 deletions(-)
> create mode 100644 arch/arm/boot/dts/stm32mp151c-dhcom-pdk2.dts
> create mode 100644 arch/arm/boot/dts/stm32mp151c-dhcom-som.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp153c-dhcom-pdk2.dts
> create mode 100644 arch/arm/boot/dts/stm32mp153c-dhcom-som.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp15xc-dhcom-pdk2.dtsi
> create mode 100644 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 55e1e54e245e..f6710f1a1bbc 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1020,6 +1020,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
> stm32746g-eval.dtb \
> stm32h743i-eval.dtb \
> stm32h743i-disco.dtb \
> + stm32mp151c-dhcom-pdk2.dtb \
> + stm32mp153c-dhcom-pdk2.dtb \
> stm32mp157a-avenger96.dtb \
> stm32mp157a-dk1.dtb \
> stm32mp157c-dhcom-pdk2.dtb \
> diff --git a/arch/arm/boot/dts/stm32mp151c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp151c-dhcom-pdk2.dts
> new file mode 100644
> index 000000000000..196a6bddfcf0
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp151c-dhcom-pdk2.dts
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex at denx.de>
> + */
> +/dts-v1/;
> +
> +#include "stm32mp151c-dhcom-som.dtsi"
> +#include "stm32mp15xc-dhcom-pdk2.dtsi"
> diff --git a/arch/arm/boot/dts/stm32mp151c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp151c-dhcom-som.dtsi
> new file mode 100644
> index 000000000000..7754b6d74e16
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp151c-dhcom-som.dtsi
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex at denx.de>
> + */
> +
> +#include "stm32mp151.dtsi"
> +#include "stm32mp15xc.dtsi"
> +#include "stm32mp15xx-dhcom-som.dtsi"
> diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-pdk2.dts
> new file mode 100644
> index 000000000000..4f114b4f075a
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-pdk2.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex at denx.de>
> + */
> +/dts-v1/;
> +
> +#include "stm32mp153c-dhcom-som.dtsi"
> +#include "stm32mp15xc-dhcom-pdk2.dtsi"
> +
> +&m_can1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&m_can1_pins_a>;
> + pinctrl-1 = <&m_can1_sleep_pins_a>;
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp153c-dhcom-som.dtsi
> new file mode 100644
> index 000000000000..111fe9419f05
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-som.dtsi
> @@ -0,0 +1,8 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex at denx.de>
> + */
> +
> +#include "stm32mp153.dtsi"
> +#include "stm32mp15xc.dtsi"
> +#include "stm32mp15xx-dhcom-som.dtsi"
> diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
> index af99e132e1b1..e65869ab35f1 100644
> --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
> +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
> @@ -1,161 +1,11 @@
> // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> /*
> - * Copyright (C) 2019 Marek Vasut <marex at denx.de>
> + * Copyright (C) 2019-2020 Marek Vasut <marex at denx.de>
> */
> +/dts-v1/;
>
> #include "stm32mp157c-dhcom-som.dtsi"
> -#include <dt-bindings/pwm/pwm.h>
> -
> -/ {
> - model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
> - compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
> -
> - aliases {
> - serial0 = &uart4;
> - serial1 = &usart3;
> - serial2 = &uart8;
> - ethernet0 = ðernet0;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -
> - clk_ext_audio_codec: clock-codec {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <24000000>;
> - };
> -
> - display_bl: display-bl {
> - compatible = "pwm-backlight";
> - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> - brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
> - default-brightness-level = <8>;
> - enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
> - status = "okay";
> - };
> -
> - ethernet_vio: vioregulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vio";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - panel {
> - compatible = "edt,etm0700g0edh6";
> - backlight = <&display_bl>;
> -
> - port {
> - lcd_panel_in: endpoint {
> - remote-endpoint = <&lcd_display_out>;
> - };
> - };
> - };
> -
> - sound {
> - compatible = "audio-graph-card";
> - routing =
> - "MIC_IN", "Capture",
> - "Capture", "Mic Bias",
> - "Playback", "HP_OUT";
> - dais = <&sai2a_port &sai2b_port>;
> - status = "okay";
> - };
> -};
> -
> -&cec {
> - pinctrl-names = "default";
> - pinctrl-0 = <&cec_pins_a>;
> - status = "okay";
> -};
> -
> -ðernet0 {
> - status = "okay";
> - pinctrl-0 = <ðernet0_rmii_pins_a>;
> - pinctrl-1 = <ðernet0_rmii_pins_sleep_a>;
> - pinctrl-names = "default", "sleep";
> - phy-mode = "rmii";
> - max-speed = <100>;
> - phy-handle = <&phy0>;
> - st,eth-ref-clk-sel;
> - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
> -
> - mdio0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "snps,dwmac-mdio";
> -
> - phy0: ethernet-phy at 1 {
> - reg = <1>;
> - };
> - };
> -};
> -
> -&i2c5 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c5_pins_a>;
> - i2c-scl-rising-time-ns = <185>;
> - i2c-scl-falling-time-ns = <20>;
> - status = "okay";
> - /* spare dmas for other usage */
> - /delete-property/dmas;
> - /delete-property/dma-names;
> -
> - sgtl5000: codec at a {
> - compatible = "fsl,sgtl5000";
> - reg = <0x0a>;
> - #sound-dai-cells = <0>;
> - clocks = <&clk_ext_audio_codec>;
> - VDDA-supply = <&v3v3>;
> - VDDIO-supply = <&vdd>;
> -
> - sgtl5000_port: port {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - sgtl5000_tx_endpoint: endpoint at 0 {
> - reg = <0>;
> - remote-endpoint = <&sai2a_endpoint>;
> - frame-master;
> - bitclock-master;
> - };
> -
> - sgtl5000_rx_endpoint: endpoint at 1 {
> - reg = <1>;
> - remote-endpoint = <&sai2b_endpoint>;
> - frame-master;
> - bitclock-master;
> - };
> - };
> -
> - };
> -
> - polytouch at 38 {
> - compatible = "edt,edt-ft5x06";
> - reg = <0x38>;
> - interrupt-parent = <&gpiog>;
> - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
> - linux,wakeup;
> - };
> -};
> -
> -<dc {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <<dc_pins_b>;
> - pinctrl-1 = <<dc_pins_sleep_b>;
> - status = "okay";
> -
> - port {
> - lcd_display_out: endpoint {
> - remote-endpoint = <&lcd_panel_in>;
> - };
> - };
> -};
> +#include "stm32mp15xc-dhcom-pdk2.dtsi"
>
> &m_can1 {
> pinctrl-names = "default", "sleep";
> @@ -163,103 +13,3 @@ &m_can1 {
> pinctrl-1 = <&m_can1_sleep_pins_a>;
> status = "okay";
> };
> -
> -&sai2 {
> - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
> - clock-names = "pclk", "x8k", "x11k";
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
> - pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
> - status = "okay";
> -
> - sai2a: audio-controller at 4400b004 {
> - #clock-cells = <0>;
> - dma-names = "tx";
> - clocks = <&rcc SAI2_K>;
> - clock-names = "sai_ck";
> - status = "okay";
> -
> - sai2a_port: port {
> - sai2a_endpoint: endpoint {
> - remote-endpoint = <&sgtl5000_tx_endpoint>;
> - format = "i2s";
> - mclk-fs = <512>;
> - dai-tdm-slot-num = <2>;
> - dai-tdm-slot-width = <16>;
> - };
> - };
> - };
> -
> - sai2b: audio-controller at 4400b024 {
> - dma-names = "rx";
> - st,sync = <&sai2a 2>;
> - clocks = <&rcc SAI2_K>, <&sai2a>;
> - clock-names = "sai_ck", "MCLK";
> - status = "okay";
> -
> - sai2b_port: port {
> - sai2b_endpoint: endpoint {
> - remote-endpoint = <&sgtl5000_rx_endpoint>;
> - format = "i2s";
> - mclk-fs = <512>;
> - dai-tdm-slot-num = <2>;
> - dai-tdm-slot-width = <16>;
> - };
> - };
> - };
> -};
> -
> -&timers2 {
> - /* spare dmas for other usage (un-delete to enable pwm capture) */
> - /delete-property/dmas;
> - /delete-property/dma-names;
> - status = "okay";
> - pwm2: pwm {
> - pinctrl-0 = <&pwm2_pins_a>;
> - pinctrl-names = "default";
> - status = "okay";
> - };
> - timer at 1 {
> - status = "okay";
> - };
> -};
> -
> -&usart3 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usart3_pins_a>;
> - status = "okay";
> -};
> -
> -&uart8 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart8_pins_a>;
> - status = "okay";
> -};
> -
> -&usbh_ehci {
> - phys = <&usbphyc_port0>;
> - status = "okay";
> -};
> -
> -&usbotg_hs {
> - dr_mode = "peripheral";
> - phys = <&usbphyc_port1 0>;
> - phy-names = "usb2-phy";
> - status = "okay";
> -};
> -
> -&usbphyc {
> - status = "okay";
> -};
> -
> -&usbphyc_port0 {
> - phy-supply = <&vdd_usb>;
> - vdda1v1-supply = <®11>;
> - vdda1v8-supply = <®18>;
> -};
> -
> -&usbphyc_port1 {
> - phy-supply = <&vdd_usb>;
> - vdda1v1-supply = <®11>;
> - vdda1v8-supply = <®18>;
> -};
> diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
> index f81dc3134135..c9cbab091554 100644
> --- a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
> @@ -1,368 +1,12 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> /*
> - * Copyright (C) 2019 Marek Vasut <marex at denx.de>
> + * Copyright (C) 2019-2020 Marek Vasut <marex at denx.de>
> */
> -/dts-v1/;
>
> #include "stm32mp157.dtsi"
> #include "stm32mp15xc.dtsi"
> -#include "stm32mp15-pinctrl.dtsi"
> -#include "stm32mp15xxaa-pinctrl.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/mfd/st,stpmic1.h>
> -
> -/ {
> - memory at c0000000 {
> - device_type = "memory";
> - reg = <0xC0000000 0x40000000>;
> - };
> -
> - reserved-memory {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - mcuram2: mcuram2 at 10000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10000000 0x40000>;
> - no-map;
> - };
> -
> - vdev0vring0: vdev0vring0 at 10040000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10040000 0x1000>;
> - no-map;
> - };
> -
> - vdev0vring1: vdev0vring1 at 10041000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10041000 0x1000>;
> - no-map;
> - };
> -
> - vdev0buffer: vdev0buffer at 10042000 {
> - compatible = "shared-dma-pool";
> - reg = <0x10042000 0x4000>;
> - no-map;
> - };
> -
> - mcuram: mcuram at 30000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x30000000 0x40000>;
> - no-map;
> - };
> -
> - retram: retram at 38000000 {
> - compatible = "shared-dma-pool";
> - reg = <0x38000000 0x10000>;
> - no-map;
> - };
> - };
> -};
> -
> -&adc {
> - vdd-supply = <&vdd>;
> - vdda-supply = <&vdda>;
> - vref-supply = <&vdda>;
> - status = "okay";
> -
> - adc1: adc at 0 {
> - st,min-sample-time-nsecs = <5000>;
> - st,adc-channels = <0>;
> - status = "okay";
> - };
> -
> - adc2: adc at 100 {
> - st,adc-channels = <1>;
> - st,min-sample-time-nsecs = <5000>;
> - status = "okay";
> - };
> -};
> -
> -&dac {
> - pinctrl-names = "default";
> - pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
> - vref-supply = <&vdda>;
> - status = "okay";
> -
> - dac1: dac at 1 {
> - status = "okay";
> - };
> - dac2: dac at 2 {
> - status = "okay";
> - };
> -};
> -
> -&dts {
> - status = "okay";
> -};
> +#include "stm32mp15xx-dhcom-som.dtsi"
>
> &gpu {
> status = "okay";
> };
> -
> -&i2c4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2c4_pins_a>;
> - i2c-scl-rising-time-ns = <185>;
> - i2c-scl-falling-time-ns = <20>;
> - status = "okay";
> - /* spare dmas for other usage */
> - /delete-property/dmas;
> - /delete-property/dma-names;
> -
> - rtc at 32 {
> - compatible = "microcrystal,rv8803";
> - reg = <0x32>;
> - };
> -
> - pmic: stpmic at 33 {
> - compatible = "st,stpmic1";
> - reg = <0x33>;
> - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - status = "okay";
> -
> - regulators {
> - compatible = "st,stpmic1-regulators";
> - ldo1-supply = <&v3v3>;
> - ldo2-supply = <&v3v3>;
> - ldo3-supply = <&vdd_ddr>;
> - ldo5-supply = <&v3v3>;
> - ldo6-supply = <&v3v3>;
> - pwr_sw1-supply = <&bst_out>;
> - pwr_sw2-supply = <&bst_out>;
> -
> - vddcore: buck1 {
> - regulator-name = "vddcore";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - vdd_ddr: buck2 {
> - regulator-name = "vdd_ddr";
> - regulator-min-microvolt = <1350000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - vdd: buck3 {
> - regulator-name = "vdd";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - st,mask-reset;
> - regulator-initial-mode = <0>;
> - regulator-over-current-protection;
> - };
> -
> - v3v3: buck4 {
> - regulator-name = "v3v3";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-over-current-protection;
> - regulator-initial-mode = <0>;
> - };
> -
> - vdda: ldo1 {
> - regulator-name = "vdda";
> - regulator-min-microvolt = <2900000>;
> - regulator-max-microvolt = <2900000>;
> - interrupts = <IT_CURLIM_LDO1 0>;
> - };
> -
> - v2v8: ldo2 {
> - regulator-name = "v2v8";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - interrupts = <IT_CURLIM_LDO2 0>;
> - };
> -
> - vtt_ddr: ldo3 {
> - regulator-name = "vtt_ddr";
> - regulator-min-microvolt = <500000>;
> - regulator-max-microvolt = <750000>;
> - regulator-always-on;
> - regulator-over-current-protection;
> - };
> -
> - vdd_usb: ldo4 {
> - regulator-name = "vdd_usb";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - interrupts = <IT_CURLIM_LDO4 0>;
> - };
> -
> - vdd_sd: ldo5 {
> - regulator-name = "vdd_sd";
> - regulator-min-microvolt = <2900000>;
> - regulator-max-microvolt = <2900000>;
> - interrupts = <IT_CURLIM_LDO5 0>;
> - regulator-boot-on;
> - };
> -
> - v1v8: ldo6 {
> - regulator-name = "v1v8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - interrupts = <IT_CURLIM_LDO6 0>;
> - };
> -
> - vref_ddr: vref_ddr {
> - regulator-name = "vref_ddr";
> - regulator-always-on;
> - regulator-over-current-protection;
> - };
> -
> - bst_out: boost {
> - regulator-name = "bst_out";
> - interrupts = <IT_OCP_BOOST 0>;
> - };
> -
> - vbus_otg: pwr_sw1 {
> - regulator-name = "vbus_otg";
> - interrupts = <IT_OCP_OTG 0>;
> - };
> -
> - vbus_sw: pwr_sw2 {
> - regulator-name = "vbus_sw";
> - interrupts = <IT_OCP_SWOUT 0>;
> - regulator-active-discharge;
> - };
> - };
> -
> - onkey {
> - compatible = "st,stpmic1-onkey";
> - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
> - interrupt-names = "onkey-falling", "onkey-rising";
> - power-off-time-sec = <10>;
> - status = "okay";
> - };
> -
> - watchdog {
> - compatible = "st,stpmic1-wdt";
> - status = "disabled";
> - };
> - };
> -
> - touchscreen at 49 {
> - compatible = "ti,tsc2004";
> - reg = <0x49>;
> - vio-supply = <&v3v3>;
> - interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
> - };
> -
> - eeprom at 50 {
> - compatible = "atmel,24c02";
> - reg = <0x50>;
> - pagesize = <16>;
> - };
> -};
> -
> -&ipcc {
> - status = "okay";
> -};
> -
> -&iwdg2 {
> - timeout-sec = <32>;
> - status = "okay";
> -};
> -
> -&m4_rproc {
> - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> - <&vdev0vring1>, <&vdev0buffer>;
> - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> - mbox-names = "vq0", "vq1", "shutdown";
> - interrupt-parent = <&exti>;
> - interrupts = <68 1>;
> - status = "okay";
> -};
> -
> -&pwr_regulators {
> - vdd-supply = <&vdd>;
> - vdd_3v3_usbfs-supply = <&vdd_usb>;
> -};
> -
> -&qspi {
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
> - pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
> - reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - status = "okay";
> -
> - flash0: mx66l51235l at 0 {
> - compatible = "jedec,spi-nor";
> - reg = <0>;
> - spi-rx-bus-width = <4>;
> - spi-max-frequency = <108000000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - };
> -};
> -
> -&rng1 {
> - status = "okay";
> -};
> -
> -&rtc {
> - status = "okay";
> -};
> -
> -&sdmmc1 {
> - pinctrl-names = "default", "opendrain", "sleep";
> - pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
> - pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
> - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
> - broken-cd;
> - st,sig-dir;
> - st,neg-edge;
> - st,use-ckin;
> - bus-width = <4>;
> - vmmc-supply = <&vdd_sd>;
> - status = "okay";
> -};
> -
> -&sdmmc2 {
> - pinctrl-names = "default", "opendrain", "sleep";
> - pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> - pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> - pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> - non-removable;
> - no-sd;
> - no-sdio;
> - st,neg-edge;
> - bus-width = <8>;
> - vmmc-supply = <&v3v3>;
> - vqmmc-supply = <&v3v3>;
> - mmc-ddr-3_3v;
> - status = "okay";
> -};
> -
> -&sdmmc3 {
> - pinctrl-names = "default", "opendrain", "sleep";
> - pinctrl-0 = <&sdmmc3_b4_pins_a>;
> - pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
> - pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
> - broken-cd;
> - st,neg-edge;
> - bus-width = <4>;
> - vmmc-supply = <&v3v3>;
> - vqmmc-supply = <&v3v3>;
> - mmc-ddr-3_3v;
> - status = "okay";
> -};
> -
> -&uart4 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart4_pins_a>;
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/stm32mp15xc-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xc-dhcom-pdk2.dtsi
> new file mode 100644
> index 000000000000..bed451bb8e2c
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp15xc-dhcom-pdk2.dtsi
> @@ -0,0 +1,257 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> +/*
> + * Copyright (C) 2019 Marek Vasut <marex at denx.de>
> + */
> +
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
> + compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
> +
> + aliases {
> + serial0 = &uart4;
> + serial1 = &usart3;
> + serial2 = &uart8;
> + ethernet0 = ðernet0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + clk_ext_audio_codec: clock-codec {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> +
> + display_bl: display-bl {
> + compatible = "pwm-backlight";
> + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
> + default-brightness-level = <8>;
> + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> + };
> +
> + ethernet_vio: vioregulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vio";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + panel {
> + compatible = "edt,etm0700g0edh6";
> + backlight = <&display_bl>;
> +
> + port {
> + lcd_panel_in: endpoint {
> + remote-endpoint = <&lcd_display_out>;
> + };
> + };
> + };
> +
> + sound {
> + compatible = "audio-graph-card";
> + routing =
> + "MIC_IN", "Capture",
> + "Capture", "Mic Bias",
> + "Playback", "HP_OUT";
> + dais = <&sai2a_port &sai2b_port>;
> + status = "okay";
> + };
> +};
> +
> +&cec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&cec_pins_a>;
> + status = "okay";
> +};
> +
> +ðernet0 {
> + status = "okay";
> + pinctrl-0 = <ðernet0_rmii_pins_a>;
> + pinctrl-1 = <ðernet0_rmii_pins_sleep_a>;
> + pinctrl-names = "default", "sleep";
> + phy-mode = "rmii";
> + max-speed = <100>;
> + phy-handle = <&phy0>;
> + st,eth-ref-clk-sel;
> + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
> +
> + mdio0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + phy0: ethernet-phy at 1 {
> + reg = <1>;
> + };
> + };
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins_a>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> + /* spare dmas for other usage */
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +
> + sgtl5000: codec at a {
> + compatible = "fsl,sgtl5000";
> + reg = <0x0a>;
> + #sound-dai-cells = <0>;
> + clocks = <&clk_ext_audio_codec>;
> + VDDA-supply = <&v3v3>;
> + VDDIO-supply = <&vdd>;
> +
> + sgtl5000_port: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sgtl5000_tx_endpoint: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&sai2a_endpoint>;
> + frame-master;
> + bitclock-master;
> + };
> +
> + sgtl5000_rx_endpoint: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&sai2b_endpoint>;
> + frame-master;
> + bitclock-master;
> + };
> + };
> +
> + };
> +
> + polytouch at 38 {
> + compatible = "edt,edt-ft5x06";
> + reg = <0x38>;
> + interrupt-parent = <&gpiog>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
> + linux,wakeup;
> + };
> +};
> +
> +<dc {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <<dc_pins_b>;
> + pinctrl-1 = <<dc_pins_sleep_b>;
> + status = "okay";
> +
> + port {
> + lcd_display_out: endpoint {
> + remote-endpoint = <&lcd_panel_in>;
> + };
> + };
> +};
> +
> +&sai2 {
> + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
> + clock-names = "pclk", "x8k", "x11k";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
> + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
> + status = "okay";
> +
> + sai2a: audio-controller at 4400b004 {
> + #clock-cells = <0>;
> + dma-names = "tx";
> + clocks = <&rcc SAI2_K>;
> + clock-names = "sai_ck";
> + status = "okay";
> +
> + sai2a_port: port {
> + sai2a_endpoint: endpoint {
> + remote-endpoint = <&sgtl5000_tx_endpoint>;
> + format = "i2s";
> + mclk-fs = <512>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <16>;
> + };
> + };
> + };
> +
> + sai2b: audio-controller at 4400b024 {
> + dma-names = "rx";
> + st,sync = <&sai2a 2>;
> + clocks = <&rcc SAI2_K>, <&sai2a>;
> + clock-names = "sai_ck", "MCLK";
> + status = "okay";
> +
> + sai2b_port: port {
> + sai2b_endpoint: endpoint {
> + remote-endpoint = <&sgtl5000_rx_endpoint>;
> + format = "i2s";
> + mclk-fs = <512>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <16>;
> + };
> + };
> + };
> +};
> +
> +&timers2 {
> + /* spare dmas for other usage (un-delete to enable pwm capture) */
> + /delete-property/dmas;
> + /delete-property/dma-names;
> + status = "okay";
> + pwm2: pwm {
> + pinctrl-0 = <&pwm2_pins_a>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> + timer at 1 {
> + status = "okay";
> + };
> +};
> +
> +&usart3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&usart3_pins_a>;
> + status = "okay";
> +};
> +
> +&uart8 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart8_pins_a>;
> + status = "okay";
> +};
> +
> +&usbh_ehci {
> + phys = <&usbphyc_port0>;
> + status = "okay";
> +};
> +
> +&usbotg_hs {
> + dr_mode = "peripheral";
> + phys = <&usbphyc_port1 0>;
> + phy-names = "usb2-phy";
> + status = "okay";
> +};
> +
> +&usbphyc {
> + status = "okay";
> +};
> +
> +&usbphyc_port0 {
> + phy-supply = <&vdd_usb>;
> + vdda1v1-supply = <®11>;
> + vdda1v8-supply = <®18>;
> +};
> +
> +&usbphyc_port1 {
> + phy-supply = <&vdd_usb>;
> + vdda1v1-supply = <®11>;
> + vdda1v8-supply = <®18>;
> +};
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> new file mode 100644
> index 000000000000..ba905196fb54
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
> @@ -0,0 +1,361 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2019-2020 Marek Vasut <marex at denx.de>
> + */
> +
> +#include "stm32mp15-pinctrl.dtsi"
> +#include "stm32mp15xxaa-pinctrl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/mfd/st,stpmic1.h>
> +
> +/ {
> + memory at c0000000 {
> + device_type = "memory";
> + reg = <0xC0000000 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + mcuram2: mcuram2 at 10000000 {
> + compatible = "shared-dma-pool";
> + reg = <0x10000000 0x40000>;
> + no-map;
> + };
> +
> + vdev0vring0: vdev0vring0 at 10040000 {
> + compatible = "shared-dma-pool";
> + reg = <0x10040000 0x1000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1 at 10041000 {
> + compatible = "shared-dma-pool";
> + reg = <0x10041000 0x1000>;
> + no-map;
> + };
> +
> + vdev0buffer: vdev0buffer at 10042000 {
> + compatible = "shared-dma-pool";
> + reg = <0x10042000 0x4000>;
> + no-map;
> + };
> +
> + mcuram: mcuram at 30000000 {
> + compatible = "shared-dma-pool";
> + reg = <0x30000000 0x40000>;
> + no-map;
> + };
> +
> + retram: retram at 38000000 {
> + compatible = "shared-dma-pool";
> + reg = <0x38000000 0x10000>;
> + no-map;
> + };
> + };
> +};
> +
> +&adc {
> + vdd-supply = <&vdd>;
> + vdda-supply = <&vdda>;
> + vref-supply = <&vdda>;
> + status = "okay";
> +
> + adc1: adc at 0 {
> + st,min-sample-time-nsecs = <5000>;
> + st,adc-channels = <0>;
> + status = "okay";
> + };
> +
> + adc2: adc at 100 {
> + st,adc-channels = <1>;
> + st,min-sample-time-nsecs = <5000>;
> + status = "okay";
> + };
> +};
> +
> +&dac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
> + vref-supply = <&vdda>;
> + status = "okay";
> +
> + dac1: dac at 1 {
> + status = "okay";
> + };
> + dac2: dac at 2 {
> + status = "okay";
> + };
> +};
> +
> +&dts {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins_a>;
> + i2c-scl-rising-time-ns = <185>;
> + i2c-scl-falling-time-ns = <20>;
> + status = "okay";
> + /* spare dmas for other usage */
> + /delete-property/dmas;
> + /delete-property/dma-names;
> +
> + rtc at 32 {
> + compatible = "microcrystal,rv8803";
> + reg = <0x32>;
> + };
> +
> + pmic: stpmic at 33 {
> + compatible = "st,stpmic1";
> + reg = <0x33>;
> + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + status = "okay";
> +
> + regulators {
> + compatible = "st,stpmic1-regulators";
> + ldo1-supply = <&v3v3>;
> + ldo2-supply = <&v3v3>;
> + ldo3-supply = <&vdd_ddr>;
> + ldo5-supply = <&v3v3>;
> + ldo6-supply = <&v3v3>;
> + pwr_sw1-supply = <&bst_out>;
> + pwr_sw2-supply = <&bst_out>;
> +
> + vddcore: buck1 {
> + regulator-name = "vddcore";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + vdd_ddr: buck2 {
> + regulator-name = "vdd_ddr";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + vdd: buck3 {
> + regulator-name = "vdd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + st,mask-reset;
> + regulator-initial-mode = <0>;
> + regulator-over-current-protection;
> + };
> +
> + v3v3: buck4 {
> + regulator-name = "v3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-over-current-protection;
> + regulator-initial-mode = <0>;
> + };
> +
> + vdda: ldo1 {
> + regulator-name = "vdda";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + interrupts = <IT_CURLIM_LDO1 0>;
> + };
> +
> + v2v8: ldo2 {
> + regulator-name = "v2v8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + interrupts = <IT_CURLIM_LDO2 0>;
> + };
> +
> + vtt_ddr: ldo3 {
> + regulator-name = "vtt_ddr";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <750000>;
> + regulator-always-on;
> + regulator-over-current-protection;
> + };
> +
> + vdd_usb: ldo4 {
> + regulator-name = "vdd_usb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + interrupts = <IT_CURLIM_LDO4 0>;
> + };
> +
> + vdd_sd: ldo5 {
> + regulator-name = "vdd_sd";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + interrupts = <IT_CURLIM_LDO5 0>;
> + regulator-boot-on;
> + };
> +
> + v1v8: ldo6 {
> + regulator-name = "v1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + interrupts = <IT_CURLIM_LDO6 0>;
> + };
> +
> + vref_ddr: vref_ddr {
> + regulator-name = "vref_ddr";
> + regulator-always-on;
> + regulator-over-current-protection;
> + };
> +
> + bst_out: boost {
> + regulator-name = "bst_out";
> + interrupts = <IT_OCP_BOOST 0>;
> + };
> +
> + vbus_otg: pwr_sw1 {
> + regulator-name = "vbus_otg";
> + interrupts = <IT_OCP_OTG 0>;
> + };
> +
> + vbus_sw: pwr_sw2 {
> + regulator-name = "vbus_sw";
> + interrupts = <IT_OCP_SWOUT 0>;
> + regulator-active-discharge;
> + };
> + };
> +
> + onkey {
> + compatible = "st,stpmic1-onkey";
> + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
> + interrupt-names = "onkey-falling", "onkey-rising";
> + power-off-time-sec = <10>;
> + status = "okay";
> + };
> +
> + watchdog {
> + compatible = "st,stpmic1-wdt";
> + status = "disabled";
> + };
> + };
> +
> + touchscreen at 49 {
> + compatible = "ti,tsc2004";
> + reg = <0x49>;
> + vio-supply = <&v3v3>;
> + interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> +};
> +
> +&ipcc {
> + status = "okay";
> +};
> +
> +&iwdg2 {
> + timeout-sec = <32>;
> + status = "okay";
> +};
> +
> +&m4_rproc {
> + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> + <&vdev0vring1>, <&vdev0buffer>;
> + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> + mbox-names = "vq0", "vq1", "shutdown";
> + interrupt-parent = <&exti>;
> + interrupts = <68 1>;
> + status = "okay";
> +};
> +
> +&pwr_regulators {
> + vdd-supply = <&vdd>;
> + vdd_3v3_usbfs-supply = <&vdd_usb>;
> +};
> +
> +&qspi {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
> + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
> + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + flash0: mx66l51235l at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <108000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> +
> +&rng1 {
> + status = "okay";
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&sdmmc1 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
> + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
> + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
> + broken-cd;
> + st,sig-dir;
> + st,neg-edge;
> + st,use-ckin;
> + bus-width = <4>;
> + vmmc-supply = <&vdd_sd>;
> + status = "okay";
> +};
> +
> +&sdmmc2 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> + non-removable;
> + no-sd;
> + no-sdio;
> + st,neg-edge;
> + bus-width = <8>;
> + vmmc-supply = <&v3v3>;
> + vqmmc-supply = <&v3v3>;
> + mmc-ddr-3_3v;
> + status = "okay";
> +};
> +
> +&sdmmc3 {
> + pinctrl-names = "default", "opendrain", "sleep";
> + pinctrl-0 = <&sdmmc3_b4_pins_a>;
> + pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
> + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
> + broken-cd;
> + st,neg-edge;
> + bus-width = <4>;
> + vmmc-supply = <&v3v3>;
> + vqmmc-supply = <&v3v3>;
> + mmc-ddr-3_3v;
> + status = "okay";
> +};
> +
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart4_pins_a>;
> + status = "okay";
> +};
>
More information about the Linux-stm32
mailing list