[Linux-stm32] [RFC net-next 5/8] net: phylink: Add missing Backplane speeds

[Jose Abreu]

USXGMII also supports these missing backplane speeds.

Signed-off-by: Jose Abreu <Jose.Abreu at synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro at st.com>
Cc: Alexandre Torgue <alexandre.torgue at st.com>
Cc: Jose Abreu <joabreu at synopsys.com>
Cc: "David S. Miller" <davem at davemloft.net>
Cc: Jakub Kicinski <kuba at kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Russell King <linux at armlinux.org.uk>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Florian Fainelli <f.fainelli at gmail.com>
Cc: Heiner Kallweit <hkallweit1 at gmail.com>
Cc: netdev at vger.kernel.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 drivers/net/phy/phylink.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 70b9a143db84..4174d874b1f7 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -308,11 +308,13 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 1000baseT_Half);
 			phylink_set(pl->supported, 1000baseT_Full);
 			phylink_set(pl->supported, 1000baseX_Full);
+			phylink_set(pl->supported, 1000baseKX_Full);
 			phylink_set(pl->supported, 2500baseT_Full);
 			phylink_set(pl->supported, 2500baseX_Full);
 			phylink_set(pl->supported, 5000baseT_Full);
 			phylink_set(pl->supported, 10000baseT_Full);
 			phylink_set(pl->supported, 10000baseKR_Full);
+			phylink_set(pl->supported, 10000baseKX4_Full);
 			phylink_set(pl->supported, 10000baseCR_Full);
 			phylink_set(pl->supported, 10000baseSR_Full);
 			phylink_set(pl->supported, 10000baseLR_Full);
-- 
2.7.4