[Linux-stm32] [PATCH] ARM: dts: stm32: Add missing ETHCK clock to ethernet node

[Alexandre Torgue]

Hi Marek

On 1/17/20 1:50 PM, Marek Vasut wrote:
> On 1/15/20 5:45 PM, Patrick DELAUNAY wrote:
>> Hi Marek;
> 
> Hi,
> 
>> Add the Linux Maintainers for STM32M linux patch:
> 
> Added, if there is a need for V2.
> [...]
>>
>> Hi Alexandre,
>>
>> Can you review this patch.
>>
>> Regards
>>
>> Patrick
>>
>>> From: Marek Vasut <marex at denx.de>
>>> Sent: mercredi 15 janvier 2020 10:46
>>>
>>> Add missing 'eth-ck' clock to the ethernet node. These clock are used to generate
>>> external clock signal for the PHY in case 'st,eth_ref_clk_sel'
>>> is specified.
>>>

Just indicate in commit title that this commit is done for stm32mp15 
family. Otherwise it looks good.

Thanks
Alex

>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>> Cc: Christophe ROULLIER <christophe.roullier at st.com>
>>> Cc: Patrice Chotard <patrice.chotard at st.com>
>>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>>> ---
>>>   arch/arm/boot/dts/stm32mp151.dtsi | 2 ++
>>>   1 file changed, 2 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi
>>> b/arch/arm/boot/dts/stm32mp151.dtsi
>>> index fb41d0778b00..e0ecc5ee7d83 100644
>>> --- a/arch/arm/boot/dts/stm32mp151.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
>>> @@ -1369,10 +1369,12 @@ ethernet0: ethernet at 5800a000 {
>>>   			clock-names = "stmmaceth",
>>>   				      "mac-clk-tx",
>>>   				      "mac-clk-rx",
>>> +				      "eth-ck",
>>>   				      "ethstp";
>>>   			clocks = <&rcc ETHMAC>,
>>>   				 <&rcc ETHTX>,
>>>   				 <&rcc ETHRX>,
>>> +				 <&rcc ETHCK_K>,
>>>   				 <&rcc ETHSTP>;
>>>   			st,syscon = <&syscfg 0x4>;
>>>   			snps,mixed-burst;
>>> --
>>> 2.24.1
>>
> 
>