[Linux-stm32] [PATCH] ARM: dts: stm32: Add missing ETHCK clock to ethernet node

[Patrick DELAUNAY]

Hi Marek;

Add the Linux Maintainers for STM32M linux patch:

M:	Maxime Coquelin <mcoquelin.stm32 at gmail.com>
M:	Alexandre Torgue <alexandre.torgue at st.com>
L:	linux-stm32 at st-md-mailman.stormreply.com (moderated for non-subscribers)
L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)


Hi Alexandre,

Can you review this patch.

Regards

Patrick

> From: Marek Vasut <marex at denx.de>
> Sent: mercredi 15 janvier 2020 10:46
> 
> Add missing 'eth-ck' clock to the ethernet node. These clock are used to generate
> external clock signal for the PHY in case 'st,eth_ref_clk_sel'
> is specified.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Christophe ROULLIER <christophe.roullier at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>  arch/arm/boot/dts/stm32mp151.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi
> b/arch/arm/boot/dts/stm32mp151.dtsi
> index fb41d0778b00..e0ecc5ee7d83 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1369,10 +1369,12 @@ ethernet0: ethernet at 5800a000 {
>  			clock-names = "stmmaceth",
>  				      "mac-clk-tx",
>  				      "mac-clk-rx",
> +				      "eth-ck",
>  				      "ethstp";
>  			clocks = <&rcc ETHMAC>,
>  				 <&rcc ETHTX>,
>  				 <&rcc ETHRX>,
> +				 <&rcc ETHCK_K>,
>  				 <&rcc ETHSTP>;
>  			st,syscon = <&syscfg 0x4>;
>  			snps,mixed-burst;
> --
> 2.24.1