[Linux-stm32] [PATCH v2] mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()

[Fabrice Gasnier]

On 1/7/20 11:59 AM, Peter Ujfalusi wrote:
> dma_request_slave_channel() is a wrapper on top of dma_request_chan()
> eating up the error code.
> 
> By using dma_request_chan() directly the driver can support deferred
> probing against DMA.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
> Hi,
> 
> Changes since v1:
> - Fall back to PIO mode only in case of ENODEV and report all other errors
> 
> Regards,
> Peter

Hi Peter,

Thanks for the patch,

Acked-by: Fabrice Gasnier <fabrice.gasnier at st.com>

Best Regards,
Fabrice

> 
>  drivers/mfd/stm32-timers.c | 32 +++++++++++++++++++++++---------
>  1 file changed, 23 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c
> index efcd4b980c94..add603359124 100644
> --- a/drivers/mfd/stm32-timers.c
> +++ b/drivers/mfd/stm32-timers.c
> @@ -167,10 +167,11 @@ static void stm32_timers_get_arr_size(struct stm32_timers *ddata)
>  	regmap_write(ddata->regmap, TIM_ARR, 0x0);
>  }
>  
> -static void stm32_timers_dma_probe(struct device *dev,
> +static int stm32_timers_dma_probe(struct device *dev,
>  				   struct stm32_timers *ddata)
>  {
>  	int i;
> +	int ret = 0;
>  	char name[4];
>  
>  	init_completion(&ddata->dma.completion);
> @@ -179,14 +180,23 @@ static void stm32_timers_dma_probe(struct device *dev,
>  	/* Optional DMA support: get valid DMA channel(s) or NULL */
>  	for (i = STM32_TIMERS_DMA_CH1; i <= STM32_TIMERS_DMA_CH4; i++) {
>  		snprintf(name, ARRAY_SIZE(name), "ch%1d", i + 1);
> -		ddata->dma.chans[i] = dma_request_slave_channel(dev, name);
> +		ddata->dma.chans[i] = dma_request_chan(dev, name);
>  	}
> -	ddata->dma.chans[STM32_TIMERS_DMA_UP] =
> -		dma_request_slave_channel(dev, "up");
> -	ddata->dma.chans[STM32_TIMERS_DMA_TRIG] =
> -		dma_request_slave_channel(dev, "trig");
> -	ddata->dma.chans[STM32_TIMERS_DMA_COM] =
> -		dma_request_slave_channel(dev, "com");
> +	ddata->dma.chans[STM32_TIMERS_DMA_UP] = dma_request_chan(dev, "up");
> +	ddata->dma.chans[STM32_TIMERS_DMA_TRIG] = dma_request_chan(dev, "trig");
> +	ddata->dma.chans[STM32_TIMERS_DMA_COM] = dma_request_chan(dev, "com");
> +
> +	for (i = STM32_TIMERS_DMA_CH1; i < STM32_TIMERS_MAX_DMAS; i++) {
> +		if (IS_ERR(ddata->dma.chans[i])) {
> +			/* Save the first error code to return */
> +			if (PTR_ERR(ddata->dma.chans[i]) != -ENODEV && !ret)
> +				ret = PTR_ERR(ddata->dma.chans[i]);
> +
> +			ddata->dma.chans[i] = NULL;
> +		}
> +	}
> +
> +	return ret;
>  }
>  
>  static void stm32_timers_dma_remove(struct device *dev,
> @@ -230,7 +240,11 @@ static int stm32_timers_probe(struct platform_device *pdev)
>  
>  	stm32_timers_get_arr_size(ddata);
>  
> -	stm32_timers_dma_probe(dev, ddata);
> +	ret = stm32_timers_dma_probe(dev, ddata);
> +	if (ret) {
> +		stm32_timers_dma_remove(dev, ddata);
> +		return ret;
> +	}
>  
>  	platform_set_drvdata(pdev, ddata);
>  
>