[Linux-stm32] [PATCH net-next 2/8] net: dsa: propagate resolved link config via mac_link_up()

[Russell King - ARM Linux admin]

On Tue, Feb 25, 2020 at 11:23:07PM +0000, Russell King - ARM Linux admin wrote:
> On Tue, Feb 25, 2020 at 11:09:35PM +0200, Vladimir Oltean wrote:
> > Hi Russell,
> > 
> > On Tue, 25 Feb 2020 at 11:39, Russell King <rmk+kernel at armlinux.org.uk> wrote:
> > >
> > > Propagate the resolved link configuration down via DSA's
> > > phylink_mac_link_up() operation to allow split PCS/MAC to work.
> > >
> > > Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> > > ---
> > >  drivers/net/dsa/b53/b53_common.c       | 4 +++-
> > >  drivers/net/dsa/b53/b53_priv.h         | 4 +++-
> > >  drivers/net/dsa/bcm_sf2.c              | 4 +++-
> > >  drivers/net/dsa/lantiq_gswip.c         | 4 +++-
> > >  drivers/net/dsa/mt7530.c               | 4 +++-
> > >  drivers/net/dsa/mv88e6xxx/chip.c       | 4 +++-
> > >  drivers/net/dsa/sja1105/sja1105_main.c | 4 +++-
> > >  include/net/dsa.h                      | 4 +++-
> > >  net/dsa/port.c                         | 3 ++-
> > >  9 files changed, 26 insertions(+), 9 deletions(-)
> > >
> > 
> > It looks like you missed the felix_phylink_mac_link_up() conversion in
> > this patch? (which also makes it fail to build, by the way, I'm
> > supposed the Kbuild robot didn't already jump)
> > Nonetheless, I've manually added the missing speed, duplex, tx_pause
> > and rx_pause parameters, and it appears to work as before.
> > Same for sja1105.
> 
> Quite possibly; the patch was developed against 5.5 plus the phylink
> changes, but applied to net-next. Hmm, it seems my coccinelle script
> that detects .mac_link_up initialiser prototypes, but not the DSA
> equivalent using the old prototype.
> 
> Thanks for pointing it out.

I've just sent v2 with ocelot and qca included... and some recipients
for patch 2 bounced - the Cc line is now too long!

As far as the kbuild robot goes, you are not the first to notice that
kbuild seems to be flakey... I've noticed it for some time, as has
Greg KH.  It isn't just patches on mailing lists, it's git trees as
well.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up