[Linux-stm32] STM32MP1 level triggered interrupts

[Marek Vasut]

On 1/28/20 7:32 PM, Marek Vasut wrote:
> On 1/24/20 10:24 AM, Marc Zyngier wrote:
>> On 2020-01-24 09:17, Alexandre Torgue wrote:
>>> On 1/23/20 11:21 PM, Marek Vasut wrote:
>>
>> [...]
>>
>>>> But I still wonder, what is the purpose of the EXTImux in that SoC?
>>>> Shouldn't that permit routing GPIOs directly into GIC SPIs, which would
>>>> then permit detecting at least level-high interrupts ?
>>>>
>>>
>>> For this SoC, EXTI block detects external line edges and rises a GIC
>>> SPI interrupt. This EXTi block is mainly used to handle HW events like
>>> buttons, clocks ... So first issue seems more to be a design issue
>>> (your design doesn't fit with MP1 datasheet).
>>>
>>> Now, let's find a solution. I'll have a look on your proposition:
>>> "check the line in EOI callback and retrig".
>>>
>>> Marc, this kind a solution could be acceptable on your side ?
>>
>> It will depend on the nature of the hack you will have to put in there.
>> If it is 100% reliable, why not? Anything short of that, probably not.
> 
> I had another look into this, and what we would end up is some sort of
> phandle from exti to all the gpioX nodes in DT, would that be OK ?
> However, if we do that, then we will have the pinctrl controller (which
> has the gpio banks as subnodes) require the exti through a phandle and
> exti require the gpio banks through a phandle, so we end up with some
> sort of cyclic dependency there.
> 
> So we would need to somehow have exti lazily deal with it's gpioX
> controller phandles only when someone requests level interrupt ? That
> would probably do.

Bump? Thoughts?