[Linux-stm32] [PATCH V5 00/20] ARM: dts: stm32: Repair AV96 board

[Marek Vasut]

On 4/23/20 3:36 PM, Alexandre Torgue wrote:
> Ki Marek

Hi,

> On 4/22/20 12:45 PM, Marek Vasut wrote:
>> The AV96 board device tree is completely broken and does not match the
>> hardware. This series fixes it up.
>>
>> Marek Vasut (20):
>>    ARM: dts: stm32: Repair PMIC configuration on AV96
>>    ARM: dts: stm32: Repair PMIC interrupt on AV96
>>    ARM: dts: stm32: Add alternate pinmux for ethernet RGMII
>>    ARM: dts: stm32: Repair ethernet operation on AV96
>>    ARM: dts: stm32: Add missing ethernet PHY reset on AV96
>>    ARM: dts: stm32: Add missing ethernet PHY skews on AV96
>>    ARM: dts: stm32: Add alternate pinmux for SDMMC pins
>>    ARM: dts: stm32: Repair SDMMC1 operation on AV96
>>    ARM: dts: stm32: Add eMMC attached to SDMMC2 on AV96
>>    ARM: dts: stm32: Add QSPI NOR on AV96
>>    ARM: dts: stm32: Add configuration EEPROM on AV96
>>    ARM: dts: stm32: Enable WiFi on AV96
>>    ARM: dts: stm32: Add alternate pinmux for USART2 pins
>>    ARM: dts: stm32: Enable Bluetooth on AV96
>>    ARM: dts: stm32: Add alternate pinmux for LTDC pins
>>    ARM: dts: stm32: Add bindings for HDMI video on AV96
>>    ARM: dts: stm32: Add alternate pinmux for SAI2 pins
>>    ARM: dts: stm32: Add bindings for audio on AV96
>>    ARM: dts: stm32: Add bindings for USB on AV96
>>    ARM: dts: stm32: Rename LEDs to match silkscreen on AV96
>>
>>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi    | 280 +++++++++++++++++
>>   arch/arm/boot/dts/stm32mp157a-avenger96.dts | 324 ++++++++++++++++++--
>>   2 files changed, 572 insertions(+), 32 deletions(-)
>>
>> Cc: Alexandre Torgue <alexandre.torgue at st.com>
>> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
>> Cc: Patrice Chotard <patrice.chotard at st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at st.com>
>> Cc: linux-stm32 at st-md-mailman.stormreply.com
>> To: linux-arm-kernel at lists.infradead.org
>>
> 
> Series looks good to me. I'll merge it for my next Pr.
> Just one question, Are we still able to boot older board revision
> (prototype ones)?

I don't have one, but if we want to support the prototypes, we will need
a separate DT for that (or a few DTSi to handle the HW differences).