[Linux-stm32] [PATCH V4 22/22] ARM: dts: stm32: Rename LEDs to match silkscreen on AV96

[Manivannan Sadhasivam]

On Wed, Apr 01, 2020 at 03:22:37PM +0200, Marek Vasut wrote:
> The LED labels do not match the silkscreen on the board, fix it.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> Cc: Alexandre Torgue <alexandre.torgue at st.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
> V2: No change
> V3: No change
> ---
>  arch/arm/boot/dts/stm32mp157a-avenger96.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> index 31f23e60629f..9fcc15b6e76d 100644
> --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
> @@ -55,21 +55,21 @@ memory at c0000000 {
>  	led {
>  		compatible = "gpio-leds";
>  		led1 {
> -			label = "green:user1";
> +			label = "green:user0";
>  			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "heartbeat";
>  			default-state = "off";
>  		};
>  
>  		led2 {
> -			label = "green:user2";
> +			label = "green:user1";
>  			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "mmc0";
>  			default-state = "off";
>  		};
>  
>  		led3 {
> -			label = "green:user3";
> +			label = "green:user2";
>  			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
>  			linux,default-trigger = "mmc1";
>  			default-state = "off";
> -- 
> 2.25.1
>