[Linux-stm32] [PATCH V3 01/22] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII

[Alexandre Torgue]

On 4/1/20 1:04 PM, Marek Vasut wrote:
> On 4/1/20 11:52 AM, Alexandre Torgue wrote:
>> Hi Marek
> 
> Hi,
> 
> [...]
> 
>>> --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
>>> @@ -196,6 +196,57 @@ pins1 {
>>>            };
>>>        };
>>>    +    ethernet0_rgmii_pins_b: rgmii-1 {
>>> +        pins1 {
>>> +            pinmux = <STM32_PINMUX('G', 5, AF11)>, /*
>>> ETH_RGMII_CLK125 */
>>> +                 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
>>> +                 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
>>> +                 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
>>> +                 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
>>> +                 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
>>> +                 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
>>> +                 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
>>> +            bias-disable;
>>> +            drive-push-pull;
>>> +            slew-rate = <2>;
>>> +        };
>>> +        pins2 {
>>> +            pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
>>> +            bias-disable;
>>> +            drive-push-pull;
>>> +            slew-rate = <0>;
>>> +        };
>>> +        pins3 {
>>> +            pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
>>> +                 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
>>> +                 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
>>> +                 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
>>> +                 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
>>> +                 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
>>> +            bias-disable;
>>> +        };
>>> +    };
>>> +
>>> +    ethernet0_rgmii_pins_sleep_b: rgmii-sleep-1 {
>>
>> I just merged a series from Ahmad that unify pins group name. So it
>> should be ethernet0_rgmii_sleep_pins_b. As a lot change have been done
>> in pinctrl dtsi diles, can you rebase on top of stm32-net please?
> 
> Great. Do you have a link to this tree with this branch ?
> 

Sorry I mean stm32-next branch here: 
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git