[Linux-stm32] [PATCH 4/4] ARM: dts: stm32: remove thermal passive trip point on stm32mp157c

[Daniel Lezcano]

On 29/10/2019 17:45, Pascal Paillet wrote:
> Remove thermal passive trip point.

Why?

> Signed-off-by: Pascal Paillet <p.paillet at st.com>
> Change-Id: I494313cf467eea491236e73bd2fbe1803345586f

Remove Change-Id

> ---
>  arch/arm/boot/dts/stm32mp157c.dtsi | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index 9b11654a0a39..799b2aedd2c9 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -91,12 +91,6 @@
>  			thermal-sensors = <&dts>;
>  
>  			trips {
> -				cpu_alert1: cpu-alert1 {
> -					temperature = <85000>;
> -					hysteresis = <0>;
> -					type = "passive";
> -				};
> -
>  				cpu-crit {
>  					temperature = <120000>;
>  					hysteresis = <0>;
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog