[Linux-stm32] [PATCH 2/2] ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1

[Amelie Delaunay]

Pins used for joystick are all configured as input. "push-pull" is not a
valid setting for an input pin.

Signed-off-by: Alexandre Torgue <alexandre.torgue at st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 3f7fcba3a516..3789312c8539 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -220,7 +220,6 @@
 
 			joystick_pins: joystick {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
 				bias-pull-down;
 			};
 		};
-- 
2.17.1