[Linux-stm32] [PATCH 0/4] Update sdmmc nodes for STM32MP1

[Alexandre Torgue]

Hi Yann

On 11/6/19 11:09 AM, Yann Gautier wrote:
> The STM32MP1 SoC embeds 3 instances of the SDMMC internal peripheral.
> The sdmmc2 and sdmmc3 nodes are added in the SoC DT file, as well as
> the required pins configuration.
> The boards DT files are also updated:
> - An eMMC is connected on SDMMC2 on STM32MP157C-ED1 and EV1 boards
> - SDMMC3  can be used on the GPIO expansion pins on EV1 and DK1/DK2
> boards.
> 
> Yann Gautier (4):
>    ARM: dts: stm32: update slew-rate properties for sdmmc1 on stm32mp157
>    ARM: dts: stm32: add sdmmc2 & 3 nodes for STM32MP157 SoC
>    ARM: dts: stm32: enable sdmmc2 node for stm32mp157c-ed1 board
>    ARM: dts: stm32: add sdmmc3 node for STM32MP1 boards
> 
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 200 +++++++++++++++++++++-
>   arch/arm/boot/dts/stm32mp157a-dk1.dts     |  12 ++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts     |  16 ++
>   arch/arm/boot/dts/stm32mp157c-ev1.dts     |  12 ++
>   arch/arm/boot/dts/stm32mp157c.dtsi        |  33 +++-
>   5 files changed, 263 insertions(+), 10 deletions(-)
> 

Series applied on stm32-next.

Regards
Alex