[Linux-stm32] [RESEND v2 3/3] ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board

[Pierre-Yves MORDRET]

Enable Vivante GPU driver for stm32mp157a-dk1 and dk2 boards.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret at st.com>
---
  Version history:
    v2:
       * move GPU reserved memeory out of bottom DDR to let free this area for
         U-Boot
    v1:
       * Initial
---
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 1b1886d..bd06f7b 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -27,6 +27,17 @@
 		reg = <0xc0000000 0x20000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpu_reserved: gpu at d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
 	led {
 		compatible = "gpio-leds";
 		blue {
@@ -69,6 +80,11 @@
 	status = "okay";
 };
 
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
-- 
2.7.4