[Linux-stm32] [PATCH 1/5] iio: stmpe-adc: Add compatible name

[Philippe Schenker]

From: Philippe Schenker <philippe.schenker at toradex.com>

Add the compatible name to the driver so it gets loaded when the proper
node in DT is detected.

Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
---

 drivers/iio/adc/stmpe-adc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
index 37f4b74a5d32..9ec338ba3440 100644
--- a/drivers/iio/adc/stmpe-adc.c
+++ b/drivers/iio/adc/stmpe-adc.c
@@ -354,9 +354,14 @@ static struct platform_driver stmpe_adc_driver = {
 		.pm	= &stmpe_adc_pm_ops,
 	},
 };
-
 module_platform_driver(stmpe_adc_driver);
 
+static const struct of_device_id stmpe_adc_ids[] = {
+	{ .compatible = "st,stmpe-adc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stmpe_adc_ids);
+
 MODULE_AUTHOR("Stefan Agner <stefan.agner at toradex.com>");
 MODULE_DESCRIPTION("STMPEXXX ADC driver");
 MODULE_LICENSE("GPL v2");
-- 
2.21.0