[Linux-stm32] [PATCH 2/2] ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1

[Ludovic Barre]

From: Ludovic Barre <ludovic.barre at st.com>

This patch adds jedec compatible for spi-nor flash
on stm32mp157c-ev1 (needed with new spi-mem interface).

Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 7fef155..cae88d9 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -140,6 +140,7 @@
 	status = "okay";
 
 	flash0: mx66l51235l at 0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>;
@@ -148,6 +149,7 @@
 	};
 
 	flash1: mx66l51235l at 1 {
+		compatible = "jedec,spi-nor";
 		reg = <1>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>;
-- 
2.7.4