[Linux-stm32] [PATCH v2] media: ov5640: add support of V4L2_CID_LINK_FREQ

[Sakari Ailus]

Hi Hugues,

On Thu, Jun 27, 2019 at 02:57:04PM +0200, Hugues Fruchet wrote:
> Add support of V4L2_CID_LINK_FREQ, this is needed
> by some CSI-2 receivers.
> 
> 384MHz is exposed for the time being, corresponding
> to 96MHz pixel clock with 2 bytes per pixel on 2 data lanes.
> 
> This setup has been tested successfully with ST MIPID02
> CSI-2 to parallel bridge.
> 
> Signed-off-by: Hugues Fruchet <hugues.fruchet at st.com>
> ---

Thanks for the patch.

The driver calculates the sensor configuration based on its configuration,
and this needs to be reflected in the link frequency: it's not a static
value. See e.g. ov5640_calc_sys_clk().

> version 2:
>   - do not set control read only as per Hans' comment:
>     See https://www.mail-archive.com/linux-media@vger.kernel.org/msg147910.html
> 
>  drivers/media/i2c/ov5640.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index 82d4ce9..e6307f3 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -218,6 +218,7 @@ struct ov5640_ctrls {
>  	struct v4l2_ctrl *test_pattern;
>  	struct v4l2_ctrl *hflip;
>  	struct v4l2_ctrl *vflip;
> +	struct v4l2_ctrl *link_freq;
>  };
>  
>  struct ov5640_dev {
> @@ -2198,6 +2199,10 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +static const s64 link_freq_menu_items[] = {
> +	384000000,
> +};
> +
>  static int ov5640_set_fmt(struct v4l2_subdev *sd,
>  			  struct v4l2_subdev_pad_config *cfg,
>  			  struct v4l2_subdev_format *format)
> @@ -2636,6 +2641,8 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
>  	case V4L2_CID_VFLIP:
>  		ret = ov5640_set_ctrl_vflip(sensor, ctrl->val);
>  		break;
> +	case V4L2_CID_LINK_FREQ:
> +		return 0;
>  	default:
>  		ret = -EINVAL;
>  		break;
> @@ -2703,6 +2710,9 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
>  				       V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
>  				       V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
>  
> +	ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops, V4L2_CID_LINK_FREQ,
> +						  0, 0, link_freq_menu_items);
> +
>  	if (hdl->error) {
>  		ret = hdl->error;
>  		goto free_ctrls;
> -- 
> 2.7.4
> 

-- 
Regards,

Sakari Ailus
sakari.ailus at linux.intel.com