[Linux-stm32] [PATCH] ARM: dts: stm32: add sai id registers to stm32mp157c

[Alexandre Torgue]

Hi Olivier

On 6/11/19 1:45 PM, Olivier Moysan wrote:
> Add identification registers to address range
> of SAI DT parent node, for stm32mp157c.
> 
> Change-Id: I696363794fab59ba8d7869b3ffbc041dacdf28de
> Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
> ---
>   arch/arm/boot/dts/stm32mp157c.dtsi | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index e98aad37ff9e..0c4e6ebc3529 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi


Applied on stm32-next. Next time, don't forget to remove your gerrit 
changeID please.

Thanks.
Alex



> @@ -746,7 +746,7 @@
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges = <0 0x4400a000 0x400>;
> -			reg = <0x4400a000 0x4>;
> +			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
>   			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
>   			resets = <&rcc SAI1_R>;
>   			status = "disabled";
> @@ -778,7 +778,7 @@
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges = <0 0x4400b000 0x400>;
> -			reg = <0x4400b000 0x4>;
> +			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
>   			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
>   			resets = <&rcc SAI2_R>;
>   			status = "disabled";
> @@ -809,7 +809,7 @@
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges = <0 0x4400c000 0x400>;
> -			reg = <0x4400c000 0x4>;
> +			reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
>   			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
>   			resets = <&rcc SAI3_R>;
>   			status = "disabled";
> @@ -1164,7 +1164,7 @@
>   			#address-cells = <1>;
>   			#size-cells = <1>;
>   			ranges = <0 0x50027000 0x400>;
> -			reg = <0x50027000 0x4>;
> +			reg = <0x50027000 0x4>, <0x500273f0 0x10>;
>   			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
>   			resets = <&rcc SAI4_R>;
>   			status = "disabled";
>