[Linux-stm32] Fwd: [PATCH] serial: stm32: fix a recursive locking in stm32_config_rs485

[Erwan LE RAY]

> Hi Borut,
>
> Please add the following line in the commit message (before your 
> sign-off) in a V2 of your patch:
>
> fixes: 1bcda09d291081 ("serial: stm32: add support for RS485 hardware 
> control mode")
>
> I'm OK with the patch itself.
>
> Erwan.
>
>
> Subject: [PATCH] serial: stm32: fix a recursive locking in
>> stm32_config_rs485
>> Date: Tue,  4 Jun 2019 11:54:51 +0200
>> From: Borut Seljak <borut.seljak at t-2.net>
>> CC: Maxime Coquelin <mcoquelin.stm32 at gmail.com>, Alexandre Torgue
>> <alexandre.torgue at st.com>, Greg Kroah-Hartman
>> <gregkh at linuxfoundation.org>, linux-kernel at vger.kernel.org,
>> borut.seljak at t-2.net, linux-serial at vger.kernel.org, Jiri Slaby
>> <jslaby at suse.com>, linux-stm32 at st-md-mailman.stormreply.com,
>> linux-arm-kernel at lists.infradead.org
>>
>> Remove spin_lock_irqsave in stm32_config_rs485, it cause recursive 
>> locking.
>> Already locked in uart_set_rs485_config.
>>
>> Signed-off-by: Borut Seljak <borut.seljak at t-2.net>
>> ---
>>   drivers/tty/serial/stm32-usart.c | 2 --
>>   1 file changed, 2 deletions(-)
>>
>> diff --git a/drivers/tty/serial/stm32-usart.c
>> b/drivers/tty/serial/stm32-usart.c
>> index e8d7a7bb4339..da373a465f51 100644
>> --- a/drivers/tty/serial/stm32-usart.c
>> +++ b/drivers/tty/serial/stm32-usart.c
>> @@ -107,7 +107,6 @@ static int stm32_config_rs485(struct uart_port 
>> *port,
>>       bool over8;
>>       unsigned long flags;
>>   -    spin_lock_irqsave(&port->lock, flags);
>>       stm32_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
>>        port->rs485 = *rs485conf;
>> @@ -147,7 +146,6 @@ static int stm32_config_rs485(struct uart_port 
>> *port,
>>       }
>>        stm32_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
>> -    spin_unlock_irqrestore(&port->lock, flags);
>>        return 0;
>>   }