[Linux-stm32] [PATCH net] net: stmmac: Do not cut down 1G modes

[Jose Abreu]

Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC.

Let's allow this speed by default.

Reported-by: Ondrej Jirman <megi at xff.cz>
Tested-by: Ondrej Jirman <megi at xff.cz>
Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports")
Signed-off-by: Jose Abreu <joabreu at synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro at st.com>
Cc: Alexandre Torgue <alexandre.torgue at st.com>
Cc: Jose Abreu <joabreu at synopsys.com>
Cc: "David S. Miller" <davem at davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: netdev at vger.kernel.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Cc: Ondrej Jirman <megi at xff.cz>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 207c3755bcc5..b0d5e5346597 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -814,20 +814,15 @@ static void stmmac_validate(struct phylink_config *config,
 	phylink_set(mac_supported, 10baseT_Full);
 	phylink_set(mac_supported, 100baseT_Half);
 	phylink_set(mac_supported, 100baseT_Full);
+	phylink_set(mac_supported, 1000baseT_Half);
+	phylink_set(mac_supported, 1000baseT_Full);
+	phylink_set(mac_supported, 1000baseKX_Full);
 
 	phylink_set(mac_supported, Autoneg);
 	phylink_set(mac_supported, Pause);
 	phylink_set(mac_supported, Asym_Pause);
 	phylink_set_port_modes(mac_supported);
 
-	if (priv->plat->has_gmac ||
-	    priv->plat->has_gmac4 ||
-	    priv->plat->has_xgmac) {
-		phylink_set(mac_supported, 1000baseT_Half);
-		phylink_set(mac_supported, 1000baseT_Full);
-		phylink_set(mac_supported, 1000baseKX_Full);
-	}
-
 	/* Cut down 1G if asked to */
 	if ((max_speed > 0) && (max_speed < 1000)) {
 		phylink_set(mask, 1000baseT_Full);
-- 
2.7.4