[Linux-stm32] [PATCH v2 6/6] ARM: dts: stm32: Add romem and temperature calibration on stm32f429

[Fabrice Gasnier]

Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8d6f028..8055c98 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -78,6 +78,19 @@
 	};
 
 	soc {
+		romem: nvmem at 1fff7800 {
+			compatible = "st,stm32f4-otp";
+			reg = <0x1fff7800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_cal1: calib at 22c {
+				reg = <0x22c 0x2>;
+			};
+			ts_cal2: calib at 22e {
+				reg = <0x22e 0x2>;
+			};
+		};
+
 		timer2: timer at 40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
-- 
2.7.4